The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Theory of the Elastic Properties of Rubber
Abstract
Previous discussions of the kinetic theory of rubber elasticity have dealt with individual long chain molecules, but the theory of the structure of bulk rubber has been almost entirely undeveloped. The present paper goes beyond earlier ones both in the more detailed treatment of the individual chains and in the development of a clear-cut model of the bulk material. From the consideration of familiar properties of rubber, it is concluded that in the lightly vulcanized state it consists of a coherent network of flexible molecular chains (this involving a considerable fraction of the total material) together with other molecules not actively involved in the network, but acting like a fluid mass through which the network extends and in which it moves with Brownian motion. The idea of an effective internal pressure is advanced and discussed. A simplified model for bulk rubber is proposed, consisting of a network of idealized flexible chains extending through the material and a fluid filling it, the bounding surfaces being in equilibrium under all the forces acting on them—internal pressure, pull of the molecular network, and any external forces. For the quantitative treatment of this model the principal problem is that of computing the forces exerted by the molecular network, because of its thermal agitation, on the bounding surfaces. Two models of the flexible molecular chains have been used—one with a linear stress-extension relation (Gaussian chain), the second with independent links of fixed length, having, like real molecular chains, a definite maximum extension. Methods for the statistical treatment of chains of independent links at all extensions are developed and applied to the computation of stress-strain relations for the second of the above models. It is shown that an irregular network of Gaussian chains is equivalent to a simple set of independent chains; the corresponding reduction in the case of non-Gaussian chains is only approximate. Making this reduction in all cases, the model is applied to the quantitative computation of stress-strain curves for unilateral stretch of rubber and for stretch in two directions. A prediction is made of the change in elastic properties of rubber in the swollen state. The thermoelastic properties of rubber are worked out, and the change in slope of the nearly linear stress-temperature curves from negative to positive values with increasing strain is explained. The location of the thermoelastic inversion point, at which this slope is zero, is shown to depend only upon the cubic expansion coefficient of unstretched rubber. The linear thermal expansion coefficient of stretched rubber in the direction of the stress is shown to be positive (and of the order of the same coefficient for unstretched rubber) below the thermoelastic inversion point. Above the thermoelastic inversion point this coefficient becomes negative and is—for appreciable extensions—of the order of the cubic expansion coefficient for a gas, independent of the composition of rubber. The linear coefficient of thermal expansion perpendicular to the direction of stress is always positive. Stress-strain curves for bulk rubber at constant temperature have been compared with the theory for extensions up to 400 percent. The agreement is particularly good as concerns that part of the total stress due to changing entropy. In some rubber compounds minor deviations, variable from sample to sample, are found for small extensions. These are attributed to van der Waals forces not taken into account by the theory. The characteristic knee in rubber stress-strain curves is shown to be due to change in internal pressure in the material. This varies inversely with the extended length, and in unstretched rubber is of the order of 5 kg/cm2. The upward curvature of the stress-strain curve for larger extensions, which appears even before the onset of crystallization, is explained as due to the approach of the molecular network to its maximum extension, which is of the order of 10 times its extension in the unstretched bulk rubber. Crystallization may in general enhance the S-shape of the stress-strain curve for natural cured rubber, Neoprene and butyl rubber. Synthetic rubber of the Buna type, while having an S-shaped stress-strain curve, does not exhibit any crystallization at all. It is estimated that, in the materials considered, roughly a fourth of the rubber chains are actively involved in the network. Internal pressure, maximum extensions, and the fraction of active material all change with the state of vulcanization. The general theory developed in this paper provides a basis for the treatment of many other physical properties of stretched rubber.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“E r is known to be inversely proportional to the molecular weight between cross-links, according to James' classical work on the elastic theory of rubber [65].”
From Review on the Functional Determinants and Durability of Shape Memory Polymers (2010) · cites this paper as [65]
Citations
Cites
A Theory of Large Elastic Deformation
Mooney, M. (1940) · Journal of Applied Physics · doi:10.1063/1.1712836 · Cited by 3,617
The theory of electric and magnetic susceptibilities
Vleck, J. H. V. (1932) · Medical Entomology and Zoology · Cited by 2,029
Kühn, W. (1936) · Colloid & Polymer Science · doi:10.1007/bf01451143 · Cited by 490
(1915) · Monatshefte für Mathematik · doi:10.1007/bf01999481 · Cited by 438
Statistical Thermodynamics of Rubber
Wall, F. T. (1942) · The Journal of Chemical Physics · doi:10.1063/1.1723668 · Cited by 254
Zur innermolekularen, Statistik, insbesondere bei Kettenmolekiilen I
Guth, E. D., & Mark, H. (1934) · Monatshefte für Chemie - Chemical Monthly · doi:10.1007/bf01522052 · Cited by 240
Self-citationAnthony, R. L., Caston, R. H., & Guth, E. (1942) · The Journal of Physical Chemistry · doi:10.1021/j150422a005 · Cited by 181
Self-citationLes moments de rotation et le magnétisme dans la mécanique ondulatoire
Brillouin, L. (1927) · Journal de physique · doi:10.1051/jphysrad:019270080207400 · Cited by 58
Elastic recovery and plastic flow in raw rubber
Treloar, L. R. G. (1940) · Transactions of the Faraday Society · doi:10.1039/tf9403500538 · Cited by 56
Theory of Rubber Elasticity for Development of Synthetic Rubbers
James, H. M., & Guth, E. (1942) · Industrial & Engineering Chemistry · doi:10.1021/ie50395a025 · Cited by 29
Self-citation
Flagged first, then by citations
Research works printed but not linked: 6
- 1937, Kautschuk, 13, 201
- 1941, Ind. Eng. Chem., 33, 1624
- 1939, Acta Physicochem. U.S.S.R., 11, 485
- 1940, Trans. Faraday Soc., 36, 538
- 1929, India-Rubber J., 78, 345
- 1942, Phys. Rev., 60, 542
Cited by
Sorted by citations
Items 301–400 of 1,000
Nanosilica decorated multiwalled carbon nanotubes (CS hybrids) in natural rubber latex
George, N., Venugopal, B., John, H., Mathiazhagan, A., & Joseph, R. (2018) · Polymer · doi:10.1016/j.polymer.2018.12.014 · Cited by 41
Payal, R. S., Fujimoto, K., Jang, C., Shinoda, W., Takei, Y., Shima, H., Tsunoda, K., & Okazaki, S. (2019) · Polymer · doi:10.1016/j.polymer.2019.03.006 · Cited by 41
Anssari-Benam, A. (2021) · Mathematics and Mechanics of Solids · doi:10.1177/10812865211001094 · Cited by 41
Phase transition in strongly stretched polymer gels
Suzuki, A., Sanda, K., & Omori, Y. (1997) · The Journal of Chemical Physics · doi:10.1063/1.474880 · Cited by 41
Visco-hyperelastic constitutive law for modeling of foam’s behavior
Anani, Y., & Alizadeh, Y. (2010) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2010.11.010 · Cited by 41
Hild, G. (1997) · Polymer · doi:10.1016/s0032-3861(96)00878-6 · Cited by 41
Surface-textured PEG-based hydrogels with adjustable elasticity: Synthesis and characterization
Pfister, P. M., Wendlandt, M., Neuenschwander, P., & Suter, U. W. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.09.016 · Cited by 41
Ayatollahi, M. R., Heydari‐Meybodi, M., Dehghany, M., & Berto, F. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201600046 · Cited by 40
Comment on elastic network models and proteins
Thorpe, M. F. (2007) · Physical Biology · doi:10.1088/1478-3975/4/1/n01 · Cited by 40
Theory and simulation of the swelling of polymer gels
Kenkare, N. R., Hall, C. K., & Khan, S. A. (2000) · The Journal of Chemical Physics · doi:10.1063/1.481806 · Cited by 40
Gent, A. N. (2005) · Elsevier eBooks · doi:10.1016/b978-012464786-2/50004-3 · Cited by 39
Swelling Equilibria of Mixed Solvent/Poly(dimethylsiloxane) Systems
Yoo, J. S., Kim, S. J., & Choi, J. S. (1998) · Journal of Chemical & Engineering Data · doi:10.1021/je980147u · Cited by 39
A Full-Network Rubber Elasticity Model based on Analytical Integration
Itskov, M., Ehret, A. E., & Dargazany, R. (2009) · Mathematics and Mechanics of Solids · doi:10.1177/1081286509106441 · Cited by 39
On the elastic modulus of swollen gels
Zrı́nyi, M., & Horkay, F. (1987) · Polymer · doi:10.1016/0032-3861(87)90256-4 · Cited by 39
Pressure-Volume Relation for Cylindrical Tubes with Elastomeric Walls: The Human Aorta
King, A. L. (1946) · Journal of Applied Physics · doi:10.1063/1.1707745 · Cited by 39
Blizard, R. B. (1951) · Journal of Applied Physics · doi:10.1063/1.1700039 · Cited by 39
Zrı́nyi, M., & Horkay, F. (1982) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1982.180200504 · Cited by 39
Zeng, F., Grognec, P. L., Lacrampe, M., & Krawczak, P. (2010) · Mechanics of Materials · doi:10.1016/j.mechmat.2010.04.006 · Cited by 38
Xiang, Y., Schilling, C. A., Arora, N., Boydston, A. J., & Rudykh, S. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101511 · Cited by 38
Ethiraj, G., & Miehé, C. (2015) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2015.08.007 · Cited by 38
Mora‐Barrantes, I., Ibarra, L., Rodríguez, A., González, L. A., & Valentin, J. L. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12106e · Cited by 38
SHEPHERD, J., McDowell, D., & Jacob, Κ. T. (2005) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2005.10.003 · Cited by 38
Rennar, N., & Oppermann, W. (1992) · Colloid & Polymer Science · doi:10.1007/bf00658283 · Cited by 38
Huang, W., Wang, X., Luo, F., Zhao, X., Chen, K., & Qin, Y. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c12419 · Cited by 37
Boyacı, T., & Orakdöğen, N. (2016) · Applied Clay Science · doi:10.1016/j.clay.2015.12.018 · Cited by 37
Inferring the Nonlinear Mechanisms of a Reversible Network
Martinetti, L., Torre, O. C.-D. L., Schweizer, K. S., & Ewoldt, R. H. (2018) · Macromolecules · doi:10.1021/acs.macromol.8b01295 · Cited by 37
Tokuyama, H., Nakahata, Y., & Ban, T. (2019) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.117533 · Cited by 37
Candau, N., Oğuz, O., Federico, C. E., Stoclet, G., Tahon, J., & Maspoch, M. L. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107313 · Cited by 37
Yaoita, T., Isaki, T., Masubuchi, Y., Watanabe, H., Ianniruberto, G., Greco, F., & Marrucci, G. (2008) · The Journal of Chemical Physics · doi:10.1063/1.2899653 · Cited by 37
Unterberger, M. J., Schmoller, K. M., Wurm, C., Bausch, A. R., & Holzapfel, G. A. (2013) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.03.008 · Cited by 37
Septanika, E. G., & Ernst, L. J. (1998) · Mechanics of Materials · doi:10.1016/s0167-6636(98)00031-3 · Cited by 37
Peppas, N. A., & Lucht, L. M. (1984) · Chemical Engineering Communications · doi:10.1080/00986448408911134 · Cited by 37
Hwa, J. C. H. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205816644 · Cited by 37
Buck, G. S., & McCord, F. A. (1949) · Textile Research Journal · doi:10.1177/004051754901900405 · Cited by 37
Krigbaum, W. R., & Kaneko, M. (1962) · The Journal of Chemical Physics · doi:10.1063/1.1732327 · Cited by 37
Wet adhesion of epoxy–amine coatings on 2024-T3 aluminum alloy
Wu, T.-H., Foyet, A., Kodentsov, A. A., van der Ven, L. G. J., van Benthem, R. A. T. M., & de With, G. (2014) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2014.02.022 · Cited by 36
A phenomenological energy-based model to characterize stress-softening effect in elastomers
Elı́as-Zúñiga, A. (2005) · Polymer · doi:10.1016/j.polymer.2005.02.093 · Cited by 36
Holopainen, S. (2013) · Mechanics of Materials · doi:10.1016/j.mechmat.2013.06.009 · Cited by 36
Time dependent large principal deformation of polymers
O’Dowd, N. P., & Knauss, W. G. (1995) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(95)00004-3 · Cited by 36
Volume dependence of the elastic equation of state
Yen, L. Y., & Eichinger, B. E. (1978) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1978.180160111 · Cited by 36
A mechanical model for rubbers containing entanglements
Marrucci, G. (1979) · Rheologica Acta · doi:10.1007/bf01542766 · Cited by 36
Intermolecular Obstruction in Rubber Elasticity Theory
Jackson, J. L., Shen, M. C., & McQuarrie, D. A. (1966) · The Journal of Chemical Physics · doi:10.1063/1.1727053 · Cited by 36
Dynamics of hydraulic and contractile wave-mediated fluid transport during Drosophila oogenesis
Alsous, J. I., Romeo, N., Jackson, J. A., Mason, F. M., Dunkel, J., & Martin, A. C. (2021) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.2019749118 · Cited by 35
Bouty, A., Petitjean, L., Chatard, J., Matmour, R., Degrandcourt, C., Schweins, R., Meneau, F., Kwaśniewski, P., Boué, F., Couty, M., et al. (2015) · Faraday Discussions · doi:10.1039/c5fd00130g · Cited by 35
Mechanics-based model for non-affine swelling in perfluorosulfonic acid (PFSA) membranes
Kusoglu, A., Santare, M. H., & Karlsson, A. M. (2009) · Polymer · doi:10.1016/j.polymer.2009.03.045 · Cited by 38
Nonequivalence of the stress and strain ensembles in describing polymer-chain elasticity
Neumann, R. (1985) · Physical Review A · doi:10.1103/physreva.31.3516 · Cited by 35
Meissner, B., & Matějka, L. (2006) · Polymer · doi:10.1016/j.polymer.2006.09.036 · Cited by 35
Solid-State Characterization of the Structure and Property of Collagen
Chien, J. C. W. (1975) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15321797508076103 · Cited by 35
The thermoelastic effect in glassy polymers
Gilmour, I. W., Trainor, A., & Haward, R. N. (1978) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1978.180160710 · Cited by 35
Microstructure and rheological properties of pH-responsive core–shell particles
Tan, B. H., Tam, K. C., Lam, Y. C., & Tan, C. B. (2005) · Polymer · doi:10.1016/j.polymer.2005.08.007 · Cited by 34
On the convexity of transversely isotropic chain network models†
Ellen Kuhl, A., Menzel, A., & Garikipati, K. (2006) · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786430500080296 · Cited by 34
Mechanochemistry for On-Demand Polymer Network Materials
Wang, Z. J., & Gong, J. P. (2025) · Macromolecules · doi:10.1021/acs.macromol.4c02293 · Cited by 33
Guo, Z., & Sluys, L. J. (2005) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2005.06.026 · Cited by 33
Kakavas, P. A. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000718)77:3 · Cited by 33
Rubber elasticity for percolation network consisting of Gaussian chains
Nishi, K., Noguchi, H., Sakai, T., & Shibayama, M. (2015) · The Journal of Chemical Physics · doi:10.1063/1.4935395 · Cited by 33
Large amplitude oscillatory shear studies on the strain-stiffening behavior of gelatin gels
Sun, W., Huang, L.-Z., Yang, Y., Liu, X., & Tong, Z. (2014) · Chinese Journal of Polymer Science · doi:10.1007/s10118-015-1559-5 · Cited by 33
Dolui, T., Natarajan, T. S., Aiswarya, S., Chanda, J., Ghosh, P., Mukhopadhyay, R., Wießner, S., Heinrich, G., Das, A., & Banerjee, S. S. (2023) · Advanced Engineering Materials · doi:10.1002/adem.202300584 · Cited by 33
Fu, X., Wang, Z., & Ma, L. (2021) · Polymers · doi:10.3390/polym13030369 · Cited by 32
How Nascent Structure of Semicrystalline Polymer Powders Enhances Bulk Mechanical Properties
Jauffrès, D., Lame, O., Vigier, G., & Doré, F. (2008) · Macromolecules · doi:10.1021/ma801133v · Cited by 34
Stress-Optical Behavior of Rubber Networks at Large Deformations
Smith, K. J., & Puett, D. (1966) · Journal of Applied Physics · doi:10.1063/1.1707839 · Cited by 32
A comparison of limited-stretch models of rubber elasticity
Rickaby, S. R., & Scott, N. H. (2014) · International Journal of Non-Linear Mechanics · doi:10.1016/j.ijnonlinmec.2014.06.009 · Cited by 31
NEW INSIGHTS INTO RUBBER NETWORK STRUCTURE BY A COMBINATION OF EXPERIMENTAL TECHNIQUES
Basterra-Beroiz, B., Rommel, R., Kayser, F., Westermann, S., Valentin, J. L., & Heinrich, G. (2016) · Rubber Chemistry and Technology · doi:10.5254/rct.16.83732 · Cited by 31
Megariotis, G., Vogiatzis, G. G., Sgouros, A. P., & Theodorou, D. N. (2018) · Polymers · doi:10.3390/polym10101156 · Cited by 33
Gusev, A. A., & Schwarz, F. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b01766 · Cited by 31
Drozdov, A. D., & Christiansen, J. D. C. (2006) · International Journal of Engineering Science · doi:10.1016/j.ijengsci.2005.12.002 · Cited by 31
Dargazany, R., Khiêm, V. N., Navrath, U., & Itskov, M. (2012) · Journal of mechanics of materials and structures · doi:10.2140/jomms.2012.7.861 · Cited by 31
Recent advances in the continuum mechanics of viscoelastic liquids
Huilgol, R. R., & Phan-Thien, N. (1986) · International Journal of Engineering Science · doi:10.1016/0020-7225(86)90123-0 · Cited by 31
Burchard, W. (1985) · British Polymer Journal · doi:10.1002/pi.4980170213 · Cited by 31
Experimental and theoretical description of the plastic behaviour of semicrystalline polymers
Spathis, G., & Kontou, E. (1998) · Polymer · doi:10.1016/s0032-3861(97)00221-8 · Cited by 31
Characterization of hyperelastic deformation behavior of rubber-like materials
Bien-aimé, L. K. M., Blaise, B. B., & Béda, T. (2020) · SN Applied Sciences · doi:10.1007/s42452-020-2355-6 · Cited by 30
Besdo, D., & Ihlemann, J. (2003) · International Journal of Plasticity · doi:10.1016/s0749-6419(02)00090-6 · Cited by 30
The importance of slow motions for protein functional loops
Skliros, A., Zimmermann, M. T., Chakraborty, D., Saraswathi, S., Katebi, A., Leelananda, S. P., Kloczkowski, A., & Jernigan, R. L. (2012) · Physical Biology · doi:10.1088/1478-3975/9/1/014001 · Cited by 30
Meissner, B., & Matějka, L. (2003) · Polymer · doi:10.1016/s0032-3861(03)00411-7 · Cited by 30
Macromolecular dynamics in extensional flows: 1. Birefringence and viscometry
Carrington, S. P., Tatham, J. P., OdeII, J. A., & Sáez, A. E. (1997) · Polymer · doi:10.1016/s0032-3861(96)00999-8 · Cited by 30
Thermoelasticity, Chain Conformation, and the Equation of State for Rubber Networks
Tobolsky, A. V., & Shen, M. C. (1966) · Journal of Applied Physics · doi:10.1063/1.1708646 · Cited by 30
Dispersyn, J., Hertelé, S., Waele, W. D., & Belis, J. (2017) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2017.03.017 · Cited by 29
Britton, S. R., Kim, O. V., Pancaldi, F., Xu, Z., Игоревич, Л. Р., Weisel, J. W., & Alber, M. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.05.068 · Cited by 29
A hyperelastic constitutive model for rubber-like materials
Külcü, İ. D. (2019) · Archive of Applied Mechanics · doi:10.1007/s00419-019-01629-7 · Cited by 29
Anssari-Benam, A., Bucchi, A., Horgan, C. O., & Saccomandi, G. (2021) · Rubber Chemistry and Technology · doi:10.5254/rct.21.78975 · Cited by 29
Effects of sensitizer length on radiation crosslinked shape–memory polymers
Ware, T. H., Voit, W., & Gall, K. (2009) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2009.10.006 · Cited by 29
Gorlier, E., Agassant, J. F., Haudin, J. M., & Billon, N. (2001) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1179/146580101101541435 · Cited by 29
The effect of strain-induced crystallization (SIC) on the physical properties of natural rubber (NR)
Toki, S. (2014) · Elsevier eBooks · doi:10.1533/9780857096913.1.135 · Cited by 29
Takayama, G., & Kondo, T. (2023) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2023.121311 · Cited by 30
Improvement of mechanical properties of elastic materials by chemical methods
Takeoka, Y., Liu, S., & Asai, F. (2020) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2020.1849931 · Cited by 29
Hydrogel composite mimics biological tissues
Horkay, F., & Basser, P. J. (2022) · Soft Matter · doi:10.1039/d2sm00505k · Cited by 28
Zäh, D., & Miehé, C. (2014) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.12.017 · Cited by 28
Equilibrium Swelling of Polystyrene Networks by Linear Polystyrene
Russ, T., Brenn, R., & Geoghegan, M. (2002) · Macromolecules · doi:10.1021/ma0211885 · Cited by 28
Carn, F., Durupthy, O., Bruno Fayolle, C., Coradin, T., Mosser, G., Schmutz, M., Maquet, J., Livage, J., & Steunou, N. (2009) · Chemistry of Materials · doi:10.1021/cm902836g · Cited by 28
Creep-induced anisotropy in covalent adaptable network polymers
Hanzon, D. W., He, X., Yang, H. X., Shi, Q., & Yu, K. (2017) · Soft Matter · doi:10.1039/c7sm01174a · Cited by 28
Baeza, G. P. (2018) · Macromolecules · doi:10.1021/acs.macromol.7b02208 · Cited by 28
Thermal Fluctuations and Rubber Elasticity
Xing, X., Goldbart, P. M., & Radzihovsky, L. (2007) · Physical Review Letters · doi:10.1103/physrevlett.98.075502 · Cited by 28
Roth, F. L., & Wood, L. A. (1944) · Journal of Applied Physics · doi:10.1063/1.1707384 · Cited by 28
Elastomeric Organosilicon Micronetworks
Baumann, F., Deubzer, B., Geck, M., Dauth, J., & Schmidt, M. (1997) · Macromolecules · doi:10.1021/ma970415d · Cited by 28
Jiang, S., & Yong, Z. (2024) · Polymers · doi:10.3390/polym16162304 · Cited by 27
Extending the effective temperature model to the large strain hardening behavior of glassy polymers
Wang, Z., Guo, J., Seppala, J. E., & Nguyen, T. D. (2020) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2020.104175 · Cited by 27
Ji, X., Zhang, X., Yue, J., Lu, Y., & Zhang, L. (2022) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2022.107094 · Cited by 27
Hashimoto, K., Enoki, T., Liu, C., Li, X., Sakai, T., & Mayumi, K. (2024) · Macromolecules · doi:10.1021/acs.macromol.3c02038 · Cited by 27
Constitutive model for fiber-reinforced materials with deformable matrices
Planas, J., Guinea, G. V., & Elices, M. (2007) · Physical Review E · doi:10.1103/physreve.76.041903 · Cited by 27
Packing Regularities in Biological Structures Relate to Their Dynamics
Jernigan, R. L., & Kloczkowski, A. (2006) · Humana Press eBooks · doi:10.1385/1-59745-189-4:251 · Cited by 27
The influence of curing systems on the properties of natural rubber
Chan, B. L., Elliott, D. J., Holley, M., & Smith, J. F. (1974) · Journal of Polymer Science Polymer Symposia · doi:10.1002/polc.5070480108 · Cited by 27
Metadata
- Authors
- James, H. M., & Guth, E.
- Affiliations
- Purdue University West Lafayette (US)
- University of Notre Dame (US)
- Venue
- The Journal of Chemical Physics
- Publisher
- AIP Publishing
- Published
- 1943-10-01
- Volume
- 11
- Issue
- 10
- Pages
- 455-481
- ISSN
- 0021-9606 (ISSN-L)
- 1089-7690
- OpenAlex
- W2047439171
- Cited by
- 1,230
- References
- 12
- Citations by year
- 2026: 52 · 2025: 37 · 2024: 56 · 2023: 50 · 2022: 61 · 2021: 46 · 2020: 43 · 2019: 48 · 2018: 25 · 2017: 34 · 2016: 30 · 2015: 36 · 2014: 36 · 2013: 31 · 2012: 29
- FWCI
- 56.02
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- The Journal of Chemical Physics (publishedVersion)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Elasticity and Material Modeling
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Rheology and Fluid Dynamics Studies
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Advanced Physical and Chemical Molecular Interactions
- Keywords
- rubber elasticity, vulcanized rubber, network models, Gaussian chain model, stress-strain behavior, thermal expansion, Brownian motion, biaxial stretching
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review