The DOI matches its Crossref record.
Size dependence of thermal stability of TiO2 nanoparticles
Abstract
Anatase TiO2 nanoparticles with average particle size ranging between 12 and 23 nm were synthesized by metalorganic chemical vapor deposition. The structure and particle size were determined by x-ray diffraction and transmission electron microscopy. The specific surface areas were measured by Brunauer-Emmett-Teller and ranged from 65 to 125m2∕g. The size effects on the stability of TiO2 in the air were studied by x-ray diffraction and transmission electron diffraction for isochronally annealed samples in the temperature range of 700–800 °C. Only anatase to rutile phase transformation occurred. With the decrease of initial particle size the onset transition temperature was decreased. An increased lattice compression of anatase with the raising of temperature was observed by the x-ray peak shifts. Larger distortions existed in samples with smaller particle size. The calculated activation energy for phase transformation decreased from 299 to 180 kJ∕mol with the decrease of initial anatase particle size from 23 to 12 nm. The decreased thermal stability in finer nanoparticles was primarily due to the reduced activation energy as the size related surface enthalpy and stress energy increased.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Pettibone, J. M., Cwiertny, D. M., Scherer, M., & Grassian, V. H. (2008) · Langmuir · doi:10.1021/la7039916 · Cited by 256
SiO2/TiO2 distributed Bragg reflector near 1.5 μ m fabricated by e-beam evaporation
Feng, I.-W., Jin, S., Li, J., Lin, J., & Jiang, H. (2013) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.4823705 · Cited by 29
Metadata
- Authors
- Li, W., Ni, C., Lin, H., Huang, C. P., & Shah, S. I.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2004-12-01
- Volume
- 96
- Issue
- 11
- Pages
- 6663-6668
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W1980998799
- Cited by
- 283
- References
- 0
- FWCI
- 3.13
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Size dependence of thermal stability of TiO2 nanoparticles. https://app.cochat.ai/papers/10.1063/1.1807520
- The paper
- Li, W., Ni, C., Lin, H., Huang, C. P., & Shah, S. I. (2004). Size dependence of thermal stability of TiO2 nanoparticles. Journal of Applied Physics. https://doi.org/10.1063/1.1807520
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.