The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Photopyroelectric measurement of thermal conductivity of metallic powders
Abstract
The effective thermal diffusivity of metal powders in air at room temperature is measured by the photopyroelectric technique. The thermal conductivity is calculated from the diffusivity, the relative density, and the specific heat obtained from literature. Maxwell’s model is a good prediction but underestimates the measured effective thermal conductivity, especially for irregular particles. Due to the large difference between the thermal conductivity of metals and air, the effective conductivity is mainly determined by the relative density of the powder bed but not by the properties of the powder material. A theoretical model showing the influence of grain size and gas pressure is presented. The dependence on the particles’ size and pressure is explained by the gradual transition from the free molecular to conductive mechanism of heat transfer in gaps between particles. The theory gives a precise estimation of effective thermal conductivity for metallic powders with a narrow size distribution of spherical particles and it underestimates this value in the case of a wide size distribution or in the case of irregular particles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bruggeman, D. A. G. (1935) · Annalen der Physik · doi:10.1002/andp.19354160705 · Cited by 8,645
Flash Method of Determining Thermal Diffusivity, Heat Capacity, and Thermal Conductivity
Parker, W. J., Jenkins, R. J., Butler, C. P., & Abbott, G. L. (1961) · Journal of Applied Physics · doi:10.1063/1.1728417 · Cited by 3,978
Gustafsson, S. E. (1991) · Review of Scientific Instruments · doi:10.1063/1.1142087 · Cited by 1,480
Cited by
Mesoscopic simulation model of selective laser melting of stainless steel powder
Khairallah, S. A., & Anderson, A. (2014) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.06.001 · Cited by 616
Mostafaei, A., Ghiaasiaan, R., Ho, I.-T., Strayer, S., Chang, K.-C., Shamsaei, N., Shao, S., Paul, S., Yeh, A.-C., Tin, S., et al. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101108 · Cited by 531
Mechanistic models for additive manufacturing of metallic components
Wei, H. L., Mukherjee, T., Zhang, W., Zuback, J. S., Knapp, G. L., De, A., & DebRoy, T. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100703 · Cited by 530
Liu, Y., Yang, Y., Mai, S., Wang, D., & Song, C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.08.086 · Cited by 498
Tan, J. H., Wong, W. L. E., & Dalgarno, K. W. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.10.011 · Cited by 407
Metadata
- Authors
- Rombouts, M., Froyen, L., Gusarov, A. V., Bentefour, E. H., & Glorieux, C.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2004-12-23
- Volume
- 97
- Issue
- 2
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2088606919
- Cited by
- 170
- References
- 3
- FWCI
- 0.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Photopyroelectric measurement of thermal conductivity of metallic powders. https://app.cochat.ai/papers/10.1063/1.1832740
- The paper
- Rombouts, M., Froyen, L., Gusarov, A. V., Bentefour, E. H., & Glorieux, C. (2005). Photopyroelectric measurement of thermal conductivity of metallic powders. Journal of Applied Physics. https://doi.org/10.1063/1.1832740
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.