The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Measurement of thermo-optic properties of Y3Al5O12, Lu3Al5O12, YAIO3, LiYF4, LiLuF4, BaY2F8, KGd(WO4)2, and KY(WO4)2 laser crystals in the 80–300K temperature range
Abstract
Thermo-optic materials properties of laser host materials have been measured to enable solid-state laser performance modeling. The thermo-optic properties include thermal diffusivity (β), specific heat at constant pressure (Cp), thermal conductivity (κ), coefficient of thermal expansion (α), thermal coefficient of the optical path length (γ) equal to (dO∕dT)∕L, and thermal coefficient of refractive index (dn∕dT) at 1064nm; O denotes the optical path length, which is equal to the product of the refractive index (n) and sample length (L). Thermal diffusivity and specific heat were measured using laser-flash method. Thermal conductivity was deduced using measured values of β, Cp, and the density (ρ). Thermal expansion was measured using a Michelson laser interferometer. Thermal coefficient of the optical path length was measured at 1064nm, using interference between light reflected from the front and rear facets of the sample. Thermal coefficient of the refractive index was determined, using the measured values of γ, α, and n. β and κ of Y3Al5O12, YAIO3, and LiYF4 were found to decrease, as expected, upon doping with Yb.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Flash Method of Determining Thermal Diffusivity, Heat Capacity, and Thermal Conductivity
Parker, W. J., Jenkins, R. J., Butler, C. P., & Abbott, G. L. (1961) · Journal of Applied Physics · doi:10.1063/1.1728417 · Cited by 3,978
Geller, S., & Wood, E. A. (1956) · Acta Crystallographica · doi:10.1107/s0365110x56001571 · Cited by 558
Krupke, W. F., Shinn, M. D., Marion, J. E., Caird, J. A., & Stokowski, S. E. (1986) · Journal of the Optical Society of America B · doi:10.1364/josab.3.000102 · Cited by 384
Thermal Conductivity of Garnets and Phonon Scattering by Rare-Earth Ions
Slack, G. A., & Oliver, D. W. (1971) · Physical Review B · doi:10.1103/physrevb.4.592 · Cited by 301
Thermal Conductivity, Diffusivity, and Expansion of Y2O3, Y3 Al5O12, and LaF3 in the Range 77°–300°K
Klein, P. H., & Croft, W. J. (1967) · Journal of Applied Physics · doi:10.1063/1.1709730 · Cited by 276
Proceedings of the eighth symposium on thermophysical properties
Sengers, J. V. (1982) · ASME Press eBooks · Cited by 81
Cited by
Petawatt and exawatt class lasers worldwide
Danson, C. N., Haefner, C., Bromage, J., Butcher, T., Chanteloup, J.-C. F., Chowdhury, E. A., Galvanauskas, A., Gizzi, L. A., Hein, J., Hillier, D. I., et al. (2019) · High Power Laser Science and Engineering · doi:10.1017/hpl.2019.36 · Cited by 940
Spotlight on Luminescence Thermometry: Basics, Challenges, and Cutting‐Edge Applications
Brites, C. D. S., Marin, R., Suta, M., Carneiro Neto, A. N., Ximendes, E., Jaque, D., & Carlos, L. D. (2023) · Advanced Materials · doi:10.1002/adma.202302749 · Cited by 464
1 J, 05 kHz repetition rate picosecond laser
Baumgarten, C., Pedicone, M., Bravo, H., Wang, H., Yin, L., Menoni, C. S., Rocca, J. J., & Reagan, B. A. (2016) · Optics Letters · doi:10.1364/ol.41.003339 · Cited by 95
Metadata
- Authors
- Aggarwal, R. L., Ripin, D. J., Ochoa, J. R., & Fan, T. Y.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2005-11-15
- Volume
- 98
- Issue
- 10
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W1632011285
- Cited by
- 460
- References
- 6
- FWCI
- 4.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.