Transferability of coarse-grained force fields: The polymer case
The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
A key question for all coarse-graining methodologies is the degree of transferability of the resulting force field between various systems and thermodynamic conditions. Here we present a detailed study of the transferability over different thermodynamic states of a coarse-grained (CG) force field developed using the iterative Boltzmann inversion method. The force field is optimized against distribution functions obtained from atomistic simulations. We analyze the polymer case by investigating the bulk of polystyrene and polyamide-6,6 whose coarse-grained models differ in the chain length and in the number of atoms lumped in one bead. The effect of temperature and pressure on static, dynamic, and thermodynamic properties is tested by comparing systematically the coarse-grain results with the atomistic ones. We find that the CG model describing the polystyrene is transferable only in a narrow range of temperature and it fails in describing the change of the bulk density when temperature is 80K lower than the optimization one. Moreover the calculation of the self-diffusion coefficient shows that the CG model is characterized by a faster dynamics than the atomistic one and that it overestimates the isothermal compressibility. On the contrary, the polyamide-6,6 CG model turns out to be fully transferable between different thermodynamic conditions. The transferability is checked by changing either the temperature or the pressure of the simulation. We find that, in this case, the CG model is able to follow all the intra- and interstructural rearrangements caused by the temperature changes. In addition, while at low temperature the difference between the CG and atomistic dynamics is remarkable due to the presence of hydrogen bonds in the atomistic systems, for high temperatures, the speedup of the CG dynamics is strongly reduced, leading to a CG diffusion coefficient only six times bigger than the atomistic one. Moreover, the isothermal compressibility calculated at different temperatures agrees very well with the experimental one. We find that the polymer chain length does not affect the transferability of the force field and we attribute such transferability mainly to the finer model used in describing the polyamide-6,6 than the polystyrene.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“All the intra-and inter-structural rearrangements induced by the temperature change can be correctly reproduced by the coarse-grained model [232].”
From Challenges in Multiscale Modeling of Polymer Dynamics (2013) · cites this paper as [232]
In the citing paper
“They found that the coarse-grained PS model (with the center of the super atoms defined on the methylene group, as shown in Figure 10b) was only transferable over a very narrow temperature range, and its bulk density change cannot be correctly predicted by the coarse-grained model when the temperature is about 80 K below the optimization temperature (500 K) [232].”
From Challenges in Multiscale Modeling of Polymer Dynamics (2013) · cites this paper as [232]
In the citing paper
“They also found that chain length did not affect the transferability of the derived potentials, and that the transferability of the PA66 coarse-grained potential was due to the lower degree of coarse graining, compared with the PS model [232].”
From Challenges in Multiscale Modeling of Polymer Dynamics (2013) · cites this paper as [232]
In the citing paper
“In addition, the isothermal compressibility of the PS melts was also overestimated by the coarse-grained model.”
From Challenges in Multiscale Modeling of Polymer Dynamics (2013) · cites this paper as [232]
In the citing paper
“Moreover, the isothermal compressibility of PA66 polymers calculated from the coarse-grained simulations at different temperatures is in accordance with the experimental values [232].”
From Challenges in Multiscale Modeling of Polymer Dynamics (2013) · cites this paper as [232]
1 more claim about this paper
Create a free account to see every claim other papers make about this one.
Citations
Cites
Physical Properties of Polymers Handbook
(2007) · Springer eBooks · doi:10.1007/978-0-387-69002-5 · Cited by 3,429
Coarse Grained Model for Semiquantitative Lipid Simulations
Marrink, S. J., de Vries, A. H., & Mark, A. E. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp036508g · Cited by 2,257
Mark, J. E. (2009) · Cited by 1,658
Deriving effective mesoscale potentials from atomistic simulations
Reith, D., Pütz, M., & Müller‐Plathe, F. (2003) · Journal of Computational Chemistry · doi:10.1002/jcc.10307 · Cited by 1,314
Self-citationAggregation and vesiculation of membrane proteins by curvature-mediated interactions
Reynwar, B. J., Illya, G., Harmandaris, V. A., Müller, M. M., Kremer, K., & Deserno, M. (2007) · Nature · doi:10.1038/nature05840 · Cited by 761
Multiscale coarse graining of liquid-state systems
Izvekov, S., & Voth, G. A. (2005) · The Journal of Chemical Physics · doi:10.1063/1.2038787 · Cited by 653
Hierarchical modeling of polystyrene: From atomistic to coarse-grained simulations
Harmandaris, V. A., Adhikari, N. P., van der Vegt, N. F. A., & Kremer, K. (2006) · Macromolecules · doi:10.1021/ma0606399 · Cited by 350
Hydrogen bonding, mobility, and structural transitions in aliphatic polyamides
Murthy, N. S. (2006) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20833 · Cited by 271
Milano, G., & Müller-Plathe, F. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp0523571 · Cited by 260
Self-citationSpyriouni, T., Tzoumanekas, C., Theodorou, D., Müller-Plathe, F., & Milano, G. (2007) · Macromolecules · doi:10.1021/ma0700983 · Cited by 204
Self-citationYASP: A molecular simulation package
Müller-Plathe, F. (1993) · Computer Physics Communications · doi:10.1016/0010-4655(93)90144-2 · Cited by 177
Self-citationEquation-of-state parameters for polystyrene
Höcker, H., Blake, G. J., & Flory, P. J. (1971) · Trans. Faraday Soc. · doi:10.1039/tf9716702251 · Cited by 175
Formation of chain-folded structures in supercooled polymer melts
Meyer, H., & Müller‐Plathe, F. (2001) · The Journal of Chemical Physics · doi:10.1063/1.1415456 · Cited by 149
Self-citationHyperbranched Conjugated Polyelectrolyte Bilayers for Solar-Cell Applications
Taranekar, P., Qiao, Q., Jiang, H., Ghiviriga, I., Schanze, K. S., & Reynolds, J. R. (2007) · Journal of the American Chemical Society · doi:10.1021/ja073216a · Cited by 142
A coarse-graining procedure for flexible polymer chains with bonded and nonbonded interactions
Fukunaga, H., Takimoto, J.-I., & Doi, M. (2002) · The Journal of Chemical Physics · doi:10.1063/1.1469609 · Cited by 132
A coarse grain model for n-alkanes parameterized from surface tension data
Nielsen, S. O., Lopez, C. F., Srinivas, G., & Klein, M. L. (2003) · The Journal of Chemical Physics · doi:10.1063/1.1607955 · Cited by 122
Structure of Atactic Polystyrene: A Molecular Dynamics Simulation Study
Ayyagari, C., Bedrov, D., & Smith, G. D. (2000) · Macromolecules · doi:10.1021/ma0003553 · Cited by 121
When Does a Molecule Become a Polymer?
Ding, Y., Kisliuk, A., & Sokolov, A. P. (2004) · Macromolecules · doi:10.1021/ma035618i · Cited by 109
Coarse graining of short polythylene chains for studying polymer crystallization
Vettorel, T., & Meyer, H. (2006) · Journal of Chemical Theory and Computation · doi:10.1021/ct0503264 · Cited by 90
Atomistic Simulation of the Water Influence on the Local Structure of Polyamide 6,6
Goudeau, S., Charlot, M., Vergelati, C., & Müller-Plathe, F. (2004) · Macromolecules · doi:10.1021/ma049848o · Cited by 84
Self-citationCoarse-grained molecular dynamics simulations of polymer melts in transient and steady shear flow
Padding, J. T., & Briels, W. J. (2003) · The Journal of Chemical Physics · doi:10.1063/1.1572459 · Cited by 76
Murthy, N. S., Wang, Z., & Hsiao, B. S. (1999) · Macromolecules · doi:10.1021/ma990475e · Cited by 71
Zang, Y., & Carreau, P. J. (1991) · Journal of Applied Polymer Science · doi:10.1002/app.1991.070420721 · Cited by 68
State point dependence of systematically coarse–grained potentials
Ghosh, J., & Faller, R. (2007) · Molecular Simulation · doi:10.1080/08927020701275050 · Cited by 61
Preparing Relaxed Systems of Amorphous Polymers by Multiscale Simulation: Application to Cellulose
Queyroy, S., Neyertz, S., Brown, D., & Müller‐Plathe, F. (2004) · Macromolecules · doi:10.1021/ma035821d · Cited by 51
Self-citationChen, X., Carbone, P., Cavalcanti, W. L., Milano, G., & Müller‐Plathe, F. (2007) · Macromolecules · doi:10.1021/ma0707178 · Cited by 41
Self-citation(2002) · doi:10.1002/1439-7641(20020916)3:9<754::aid-cphc754>3.0.co;2-u
Self-citation
Research works printed but not linked: 1
- 2007, Macromolecules, 40, 7074
Cited by
Coarse-graining polymers with the MARTINI force-field: polystyrene as a benchmark case
Rossi, G., Monticelli, L., Puisto, S. R., Vattulainen, I., & Ala-Nissila, T. (2011) · Soft Matter · doi:10.1039/c0sm00481b · Cited by 271
A review of advancements in coarse-grained molecular dynamics simulations
Joshi, S. Y., & Deshmukh, S. A. (2021) · Molecular Simulation · doi:10.1080/08927022.2020.1828583 · Cited by 266
“This is known as the ‘ transferability problem ’ [96,223,224] .”
BackgroundTemperature-transferable coarse-grained potentials for ethylbenzene, polystyrene, and their mixtures
Qian, H.-J., Carbone, P., Chen, X., Karimi-Varzaneh, H. A., Liew, C. C., & Müller-Plathe, F. (2008) · Macromolecules · doi:10.1021/ma801910r · Cited by 247
Self-citationA Review of Multiscale Computational Methods in Polymeric Materials
Gooneie, A., Schuschnigg, S., & Holzer, C. (2017) · Polymers · doi:10.3390/polym9010016 · Cited by 227
Challenges in Multiscale Modeling of Polymer Dynamics
Li, Y., Abberton, B., Kröger, M., & Liu, W. (2013) · Polymers · doi:10.3390/polym5020751 · Cited by 222
“They also found that chain length did not affect the transferability of the derived potentials, and that the transferability of the PA66 coarse-grained potential was due to the lower degree of coarse graining, compared with the PS model [232].”
BackgroundMethodResultInfluential
Metadata
- Authors
- Carbone, P., Varzaneh, H. A. K., Chen, X., & Müller-Plathe, F.
- Affiliations
- Technische Universität Darmstadt (DE)
- Technische Universität Darmstadt Eduard-Zintl-Institut für Anorganishe und Physikalische Chemie, , Petersenstrasse 20, D-64287 Darmstadt, Germany
- Venue
- The Journal of Chemical Physics
- Publisher
- AIP Publishing
- Published
- 2008-02-11
- Volume
- 128
- Issue
- 6
- Pages
- 064904-064904
- ISSN
- 0021-9606 (ISSN-L)
- 1089-7690
- OpenAlex
- W2059244287
- Cited by
- 219
- References
- 27
- Citations by year
- 2026: 5 · 2025: 10 · 2024: 6 · 2023: 11 · 2022: 9 · 2021: 10 · 2020: 14 · 2019: 19 · 2018: 12 · 2017: 12 · 2016: 15 · 2015: 12 · 2014: 9 · 2013: 13 · 2012: 22
- FWCI
- 8.17
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- The Journal of Chemical Physics (publishedVersion)
- PubMed (publishedVersion)
- Research Explorer (The University of Manchester) (submittedVersion)
- Topics
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Advanced Physical and Chemical Molecular Interactions
- Physical Sciences › Materials Science › Materials Chemistry › Material Dynamics and Properties
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Rheology and Fluid Dynamics Studies
- Keywords
- coarse-grained force field, force field transferability, iterative Boltzmann inversion, polystyrene, polyamide 66, polymer self-diffusion, isothermal compressibility, temperature dependence, pressure dependence, hydrogen bonding, bead size, chain length, atomistic simulation
- MeSH terms
- Caprolactam, Diffusion, Models, Chemical, Polymers, Polystyrenes, Pressure, Temperature, Thermodynamics
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.