Etching characteristics of LiNbO3 in reactive ion etching and inductively coupled plasma
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The etching characteristics of congruent LiNbO3 single crystals including doped LiNbO3 and proton-changed LiNbO3 have been studied in reactive ion etching (RIE) and inductively coupled plasma (ICP) etching tools, using different recipes of gas mixtures. The effects of parameters including working pressure, RIE power, and ICP power are investigated and analyzed by measurement of etching depth, selectivity, uniformity, etched surface state, and sidewall profile by means of focused ion beam etching, energy-dispersive x-ray analysis, secondary ion mass spectroscopy, scanning electron microscopy, and surface profilometry. The effects of a sample carrier wafer coating have also been investigated. Optimized processes with high etching rates, good mask selectivity, and a near-vertical profile have been achieved. Ridge waveguides on proton-exchanged LiNbO3 have been fabricated and optically measured.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plasma etching of proton-exchanged lithium niobate
Hu, H., Milenin, A. P., Wehrspohn, R. B., Hermann, H., & Sohler, W. (2006) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.2207150 · Cited by 79
Cited by
Integrated photonics on thin-film lithium niobate
Zhu, D., Shao, L., Yu, M., Cheng, R., Desiatov, B., Xin, C. J., Hu, Y., Holzgrafe, J., Ghosh, S., Shams-Ansari, A., et al. (2021) · Advances in Optics and Photonics · doi:10.1364/aop.411024 · Cited by 1,516
Advances in on-chip photonic devices based on lithium niobate on insulator
Lin, J., Bo, F., Cheng, Y., & Xu, J. (2020) · Photonics Research · doi:10.1364/prj.395305 · Cited by 377
“Another alternative solution for reducing the LiF redeposition is adding Ar gas in fluorine gases to physically bombard the target and enhance the sputtering process during etching [92,94,99] and using pure Ar gas without fluorine gases to avoid the LiF redeposition [30,98].”
BackgroundWeigel, P. O., Zhao, J., Fang, K., Al-Rubaye, H., Trotter, D., Hood, D., Mudrick, J., Dallo, C., Pomerene, A. T., Starbuck, A. L., et al. (2018) · Optics Express · doi:10.1364/oe.26.023728 · Cited by 338
Advances in lithium niobate photonics: development status and perspectives
Chen, G., Li, N., Ng, J. D., Lin, H.-L., Zhou, Y., Fu, Y. H., Lee, L. Y. T., Yu, Y., Liu, A.-Q., & Danner, A. J. (2022) · Advanced Photonics · doi:10.1117/1.ap.4.3.034003 · Cited by 310
Hybrid silicon and lithium niobate electro-optical ring modulator
Chen, L., Xu, Q., Wood, M. G., & Reano, R. M. (2014) · Optica · doi:10.1364/optica.1.000112 · Cited by 276
Metadata
- Authors
- Ren, Z., Heard, P. J., Marshall, J. M., Thomas, P. A., & Yu, S.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2008-02-01
- Volume
- 103
- Issue
- 3
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W1973149254
- Cited by
- 77
- References
- 1
- FWCI
- 2.90
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Etching characteristics of LiNbO3 in reactive ion etching and inductively coupled plasma. https://app.cochat.ai/papers/10.1063/1.2838180
- The paper
- Ren, Z., Heard, P. J., Marshall, J. M., Thomas, P. A., & Yu, S. (2008). Etching characteristics of LiNbO3 in reactive ion etching and inductively coupled plasma. Journal of Applied Physics. https://doi.org/10.1063/1.2838180
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.