The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Thermal depoling process and piezoelectric properties of bismuth sodium titanate ceramics
Abstract
Stoichiometric and nonstoichiometric (Bi0.5Na0.5)TiO3 (BNT) ceramics were prepared by a conventional ceramic fabrication process. This study revealed that the high conductivity of BNT ceramics is associated with Bi vaporization during sintering. An x-ray study revealed that a tetragonal phase exists in the temperature range between 330 and 480 °C in BNT ceramic as well as BNT single crystals. In addition, the depolarization temperature Td, rhombohedral-tetragonal phase transition temperature TR-T, and the temperature Tm of the maximum dielectric constant were determined to be 187, approximately 300, and 325 °C, respectively, from the temperature dependences of dielectric properties using unpoled and poled specimens. The piezoelectric properties of all vibration modes and the temperature dependences of the piezoelectric properties were measured using fully poled BNT ceramics. It was also revealed that BNT ceramics exhibit three thermal depoling processes at Td, between Td and TR-T, and between TR-T and Tm from the effects of annealing on the field-induced strain, x-ray diffraction patterns, and dielectric constant of poled specimens.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(Bi1/2Na1/2)TiO3-BaTiO3 System for Lead-Free Piezoelectric Ceramics
Takenaka, T., Kei-ichi Maruyama, K.-I. M., & Koichiro Sakata, K. S. (1991) · Japanese Journal of Applied Physics · doi:10.1143/jjap.30.2236 · Cited by 2,150
Self-citationJones, G. O., & Thomas, P. A. (2002) · Acta Crystallographica Section B Structural Science · doi:10.1107/s0108768101020845 · Cited by 966
Electrical properties of Na1/2Bi1/2TiO3–BaTiO3 ceramics
Chu, B.-J., Chen, D.-R., Li, G.-R., & Yin, Q.-R. (2002) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(02)00027-4 · Cited by 569
Ferroelectric and antiferroelectric properties of (Na0.5Bi0.5)TiO3-SrTiO3 solid solution ceramics
Sakata, K., & Masuda, Y. (1974) · Ferroelectrics · doi:10.1080/00150197408238042 · Cited by 453
X-ray study of phase transitions in efrroelectric Na0.5Bi0.5TiO3
Zvirgzds, J., Kapostin, P. P., Zvirgzde, J. V., et al. (1982) · Ferroelectrics · doi:10.1080/00150198208210600 · Cited by 272
The tetragonal phase of Na0.5Bi0.5TiO3 – a new variant of the perovskite structure
Jones, G. O., & Thomas, P. A. (2000) · Acta Crystallographica Section B Structural Science · doi:10.1107/s0108768100001166 · Cited by 225
Hiruma, Y., Watanabe, T., Nagata, H., & Takenaka, T. (2008) · Japanese Journal of Applied Physics · doi:10.1143/jjap.47.7659 · Cited by 138
Self-citationTemperature Dependence of Electric Properties of [Bi0.5(Na1-xAgx)0.5]1-yBayTiO3 Ceramics
Wu, L., Xiao, D., Lin, D., Zhu, J., Yu, P., & Li, X. (2007) · Japanese Journal of Applied Physics · doi:10.1143/jjap.46.7382 · Cited by 18
Cited by
Transferring lead-free piezoelectric ceramics into application
Rödel, J., Webber, K. G., Dittmer, R., Jo, W., Kimura, M., & Damjanovic, D. (2015) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2014.12.013 · Cited by 1,323
Recent development in lead-free perovskite piezoelectric bulk materials
Zheng, T., Wu, J., Xiao, D., & Zhu, J. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.06.002 · Cited by 1,078
Piezoelectric Actuators and Motors: Materials, Designs, and Applications
Gao, X., Yang, J., Wu, J., Xin, X., Li, Z., Yuan, X., Shen, X., & Dong, S. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201900716 · Cited by 555
Advances in Lead-Free Piezoelectric Materials for Sensors and Actuators
Aksel, E., & Jones, J. L. (2010) · Sensors · doi:10.3390/s100301935 · Cited by 508
Tan, X., Ma, C., Frederick, J., Beckman, S., & Webber, K. G. (2011) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04917.x · Cited by 400
Metadata
- Authors
- Hiruma, Y., Nagata, H., & Takenaka, T.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2009-04-15
- Volume
- 105
- Issue
- 8
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2038857708
- Cited by
- 447
- References
- 8
- FWCI
- 9.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.