The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
High thermoelectric performance BiSbTe alloy with unique low-dimensional structure
Abstract
We report a detailed description of an innovative route of a melt spinning (MS) technique combined with a subsequent spark plasma sintering process in order to obtain high performance p-type Bi0.52Sb1.48Te3 bulk material, which possesses a unique low-dimensional structure. The unique structure consists of an amorphous structure, 5–15 nm fine nanocrystalline regions, and coherent interfaces between the resulting nanocrystalline regions. Measurements of the thermopower, electrical conductivity, and thermal conductivity have been performed over a range of temperature of 300–400 K. We found that MS technique can give us considerable control over the resulting nanostructure with good thermal stability during the temperature range of 300–400 K and this unique structure can effectively adjust the transport of phonons and electrons, in a manner such that it is beneficial to the overall thermoelectric performance of the material, primarily a reduction in the lattice thermal conductivity. Subsequently, this results in a maximum figure of merit ZT value of 1.56 at 300 K for p-type Bi0.52Sb1.48Te3 bulk material. This ZT value is over a 50% improvement of that of the state of the art commercial Bi2Te3 materials. We also report results of thermal cycling of this material for over one hundred cycles between 300–400 K. Our work offers an innovative route for developing high performance bismuth telluride based alloys and devices, which have even broader prospects for commercial applications. This technique may also be applicable to other thermoelectric materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Enhanced thermoelectric performance of rough silicon nanowires
Hochbaum, A. I., Chen, R., Delgado, R. D., Liang, W., Garnett, E. C., Najarian, M., Majumdar, A., & Yang, P. (2008) · Nature · doi:10.1038/nature06381 · Cited by 4,109
Cited by
High-performance flat-panel solar thermoelectric generators with high thermal concentration
Kraemer, D., Poudel, B., Feng, H.-P., Caylor, J. C., Yu, B., Yan, X., Ma, Y., Wang, X., Wang, D., Muto, A., et al. (2011) · Nature Materials · doi:10.1038/nmat3013 · Cited by 1,193
Nanostructured thermoelectric materials: Current research and future challenge
Chen, Z.-G., Han, G., Yang, L., Cheng, L., & Zou, J. (2012) · Progress in Natural Science: Materials International · doi:10.1016/j.pnsc.2012.11.011 · Cited by 825
Xie, W., He, J., Kang, H. J., Tang, X., Zhu, S., Laver, M., Wang, S., Copley, J. R. D., Brown, C. M., Zhang, Q., et al. (2010) · Nano Letters · doi:10.1021/nl100804a · Cited by 533
Self-citationA new class of doped nanobulk high-figure-of-merit thermoelectrics by scalable bottom-up assembly
Mehta, R. J., Zhang, Y., Karthik, C., Singh, B., Siegel, R. W., Borca-Tasciuc, T., & Ramanath, G. (2012) · Nature Materials · doi:10.1038/nmat3213 · Cited by 515
Material and manufacturing cost considerations for thermoelectrics
LeBlanc, S., Yee, S. K., Scullin, M. L., Dames, C., & Goodson, K. E. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.030 · Cited by 503
Metadata
- Authors
- Xie, W., Tang, X., Yan, Y., Zhang, Q., & Tritt, T. M.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2009-06-01
- Volume
- 105
- Issue
- 11
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W1997662096
- Cited by
- 204
- References
- 1
- FWCI
- 8.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High thermoelectric performance BiSbTe alloy with unique low-dimensional structure. https://app.cochat.ai/papers/10.1063/1.3143104
- The paper
- Xie, W., Tang, X., Yan, Y., Zhang, Q., & Tritt, T. M. (2009). High thermoelectric performance BiSbTe alloy with unique low-dimensional structure. Journal of Applied Physics. https://doi.org/10.1063/1.3143104
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.