Low-temperature thermal conductivity and specific heat of a machinable ceramic
Abstract
The thermal conductivity and specific heat of a commercial machinable ceramic have been measured to 0.06 °K. The data are compared with those of other materials commonly used in the construction of cryogenic apparatus. The role of impurities and of crystallites is discussed.
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
Roth and Anderson [15] measured Macor ceramic from 0.06 K up to ∼1.4 K.
“Roth and Anderson [15] measured Macor ceramic from 0.06 K up to ∼ 1 . 4 K.”
From Thermal conductivity of thermally-isolating polymeric and composite structural support materials between 0.3 and 4K (2008) · cites this paper as [15]
Our data agree with Lawless [8] data at temperatures above 2 K, corrected for a misscaling by a factor of 10.
“This reference also includes the data of Lawless [8] at temperatures above 2 K (corrected for a misscaling by a factor of 10) and we agree with these data as well.”
From Thermal conductivity of thermally-isolating polymeric and composite structural support materials between 0.3 and 4K (2008) · cites this paper as [15]
Our data are consistent with Roth and Anderson results for Macor ceramic.
“Our data are consistent with these results.”
From Thermal conductivity of thermally-isolating polymeric and composite structural support materials between 0.3 and 4K (2008) · cites this paper as [15]
Cited by
Sorted by citations
Runyan, M. C., & Jones, W. C. (2008) · Cryogenics · doi:10.1016/j.cryogenics.2008.06.002 · Cited by 47 · see citing works
“We are not aware of measurements of the thermal conductivity of carbon fiber composites below 1.5 K. Roth and Anderson [15] measured Macor ceramic from 0.06 K up to ∼ 1.4 K.”
BackgroundInfluentialThermal conductivity and specific heat of a glass–epoxy composite at temperatures below 4 K
Walker, F. J., & Anderson, A. C. (1981) · Review of Scientific Instruments · doi:10.1063/1.1136614 · Cited by 15 · see citing works
Self-citation
- Authors
- Roth, E. P., & Anderson, A. C.
- Affiliations
- University of Illinois Urbana-Champaign (US)
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 1976-08-01
- Volume
- 47
- Issue
- 8
- Pages
- 3644-3647
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2002764778
- Cited by
- 35
- References
- 0
- FWCI
- 1.93
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Applied Physics (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
- Physical Sciences › Materials Science › Ceramics and Composites › Advanced ceramic materials synthesis
- Physical Sciences › Materials Science › Materials Chemistry › Thermal Expansion and Ionic Conductivity
- Keywords
- thermal conductivity, specific heat, machinable ceramics, low-temperature thermophysical properties, impurities, crystallite size effects
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
