Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 288

The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.

Electrical properties and conduction mechanisms of Ru-based thick-film (cermet) resistors

Pike, G. E., Seager, C. H.·1977·Journal of Applied Physics

Abstract

This paper presents an experimental study of the electrical conduction mechanisms in thick-film (cermet) resistor. The resistors were made from one custom and three commercially formulated inks with sheet resistivities ranging from 102 to 106 Ω/⧠ in decade increments. Their microstructure and composition have been examined using optical and scanning electron microscopy, electron microprobe analysis, x-ray diffraction, and various chemical analyses. This portion of our study shows that the resistors are heterogeneous mixtures of metallic metal oxide particles (∼4×10−5 cm in diameter) and a lead silicate glass. The metal oxide particles are ruthenium containing pyrochlores, and are joined to form a continuous three-dimensional network of chain segments. The principal experimental work reported here is an extensive study of the electrical transport properties of the resistors. The temperature dependence of conductance has been measured from 1.2 to 400 K, and two features common to all resistors are found. There is a pronounced decrease in conductance at low temperatures and a shallow maximum at several hundred Kelvin. Within the same range of temperatures the reversible conductance as a function of electric field from 0 to 28 kV/cm has been studied. The resistors are non-Ohmic at all temperatures, but particularly at cryogenic temperatures for low fields. At higher fields the conductance shows a linear variation with electric field. The thick-film resistors are found to have a small dielectric constant and a (nearly) frequency-independent conductance from dc to 50 MHz. The magnetoresistance to 100 kG, the Hall mobility, and the Seebeck coefficient of most of the resistors have been measured and discovered to be quite small. Many of the electrical transport properties have also been determined for the metal oxide particles which were extracted from the fired resistors. These results yielded a quantitative estimate of the metal oxide contribution to the total thick-film resistance. Using the results of our measurements we examine four broad categories of conduction mechanism models which have been previously suggested in the literature: uniform, uniform channel, nontunneling barrier, and tunneling barrier models. The first three categories are systematically rejected because of disagreements with the data. A tunnel barrier model is then developed which incorporates two features not ordinarily considered in simple tunneling theory. The small metal oxide particle size is shown to cause a small activation energy associated with electrostatic charging of the particles. Also, impurities within the tunnel barriers are presumed to act as resonant centers which increase the barrier transmission coefficient. The model is compared in detail to our experimental results and shown to be in excellent agreement.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1063/1.323595

Cites

16 of 16 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 16 references

Cited by

See all 288

Metadata

Authors
Pike, G. E., & Seager, C. H.
Venue
Journal of Applied Physics
Published
1977-12-01
Volume
48
Issue
12
Pages
5152-5169
ISSN
  • 0021-8979 (ISSN-L)
  • 1089-7550
OpenAlex
W2072110522
Cited by
288
References
16
FWCI
7.24
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Electrical properties and conduction mechanisms of Ru-based thick-film (cermet) resistors. https://app.cochat.ai/papers/10.1063/1.323595
The paper
Pike, G. E., & Seager, C. H. (1977). Electrical properties and conduction mechanisms of Ru-based thick-film (cermet) resistors. Journal of Applied Physics. https://doi.org/10.1063/1.323595

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.