Nickel pigmented anodic aluminum oxide for selective absorption of solar energy

Abstract

Spectrally selective surfaces on Al metal sheets were prepared by dc anodization in dilute phosphoric acid followed by black coloration via ac electrolysis in a bath containing NiSO4. These coatings had good durability, as found from several accelerated tests. The optical performance was studied by the recording of hemispherical reflectance or specular reflectance in conjunction with diffuse light scattering. From these results we extracted a solar absorptance of 0.93–0.96 and a corresponding thermal emittance of 0.10–0.20. The structure of the coatings was investigated by scanning electron microscopy on fractured specimens, Auger electron spectroscopy combined with depth profiling by sputtering, and atomic absorption analysis. Based on this information, a multilayer model was formulated, its most conspicuous feature being a sheath near to the Al interface comprised of metallic Ni particles in an Al2O3 matrix. The optical properties of this layer were described either by the Maxwell Garnett theory or the Bruggeman theory, which are applicable to different microstructures. The latter formulation, together with a matrix technique to account for the multilayer configuration, was capable of giving quantitative agreement with the measured spectral reflectance, especially when reasonable estimates of surface roughness and of particle shape and orientation were invoked.