Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 417

The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.

Optical properties and solar selectivity of coevaporated Co-Al2O3 composite films

Niklasson, G. A., Granqvist, C. G.·1984·Journal of Applied Physics

Abstract

Co-Al2O3 composite films were produced by electron-beam coevaporation in a system with elaborate process control. The deposits were analyzed by transmission electron microscopy, electron diffraction, Auger electron spectroscopy, secondary ion mass spectroscopy, Rutherford backscattering, field ion microscopy, mechanical stylus measurements, and electrical dc and ac measurements. A uniform separated-grain structure with regular hcp Co particles embedded in Al2O3 was found for Co contents (fCos’) up to ∼30 vol %. The complex dielectric permeability ε̄ was evaluated in the 0.3≲λ≲40-μm wavelength range for samples with 0.11≲ fCo ≲0.60 by carefully selected combinations of spectrophotometric transmittance and reflectance data. Numerical accuracy and internal consistency were investigated. Effective medium theories for ε̄ were derived by applying classical scattering theory to spherical random unit cells defined so as to properly represent a number of typical microgeometries. The formulations due to Maxwell Garnett, Bruggeman, and others were thus rederived in a unified way. Large-size limits of validity and extensions to nonspherical particles were treated. It was found that the Maxwell Garnett theory could reproduce the experimental ε̄’s in detail at low fCo provided that some Co was taken to be dispersed in the insulating matrix. At larger fCo’s we found discrepancies which are likely to be due mainly to dipole-dipole coupling among adjacent particles. A comparison of the experimental ε̄’s and the rigorous Bergman–Milton bounds, which hold irrespective of detailed microgeometry, gave several interesting results: the ε̄’s varied monotonically along one of the bounds for isotropic materials as fCo was increased, at large fCo we found evidence for anisotropy, and at λ≊12.5 μm we noted certain cases of disagreement with even the most generous bounds. The empirical ε̄’s were used to construct surfaces which combine a high solar absorptance as with a low hemispherical thermal emittance eH. From a computer optimization study we found that as =0.95 and eH =0.07 could be obtained with 0.07 μm of Co-Al2O3 ( fCo≊0.6) antireflected with 0.07 μm of Al2O3 and laid on Ni. These results were verified by measurements on samples which approximate the ideal design.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1063/1.333386

Cites

2 of 2 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 417

Metadata

Authors
Niklasson, G. A., & Granqvist, C. G.
Venue
Journal of Applied Physics
Published
1984-05-01
Volume
55
Issue
9
Pages
3382-3410
ISSN
  • 0021-8979 (ISSN-L)
  • 1089-7550
OpenAlex
W2023930336
Cited by
417
References
2
FWCI
8.60
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.