The DOI matches its Crossref record; the references it cites are not checked yet.
Quantifying chain reptation in entangled polymer melts: Topological and dynamical mapping of atomistic simulation results onto the tube model
Abstract
The topological state of entangled polymers has been analyzed recently in terms of primitive paths which allowed obtaining reliable predictions of the static (statistical) properties of the underlying entanglement network for a number of polymer melts. Through a systematic methodology that first maps atomistic molecular dynamics (MD) trajectories onto time trajectories of primitive chains and then documents primitive chain motion in terms of a curvilinear diffusion in a tubelike region around the coarse-grained chain contour, we are extending these static approaches here even further by computing the most fundamental function of the reptation theory, namely, the probability ψ(s,t) that a segment s of the primitive chain remains inside the initial tube after time t, accounting directly for contour length fluctuations and constraint release. The effective diameter of the tube is independently evaluated by observing tube constraints either on atomistic displacements or on the displacement of primitive chain segments orthogonal to the initial primitive path. Having computed the tube diameter, the tube itself around each primitive path is constructed by visiting each entanglement strand along the primitive path one after the other and approximating it by the space of a small cylinder having the same axis as the entanglement strand itself and a diameter equal to the estimated effective tube diameter. Reptation of the primitive chain longitudinally inside the effective constraining tube as well as local transverse fluctuations of the chain driven mainly from constraint release and regeneration mechanisms are evident in the simulation results; the latter causes parts of the chains to venture outside their average tube surface for certain periods of time. The computed ψ(s,t) curves account directly for both of these phenomena, as well as for contour length fluctuations, since all of them are automatically captured in the atomistic simulations. Linear viscoelastic properties such as the zero shear rate viscosity and the spectra of storage and loss moduli obtained on the basis of the obtained ψ(s,t) curves for three different polymer melts (polyethylene, cis-1,4-polybutadiene, and trans-1,4-polybutadiene) are consistent with experimental rheological data and in qualitative agreement with the double reptation and dual constraint models. The new methodology is general and can be routinely applied to analyze primitive path dynamics and chain reptation in atomistic trajectories (accumulated through long MD simulations) of other model polymers or polymeric systems (e.g., bidisperse, branched, grafted, etc.); it is thus believed to be particularly useful in the future in evaluating proposed tube models and developing more accurate theories for entangled systems.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Based on the Z1 code [281], Stephanou et al. [74,89,[291][292][293] developed a dynamic mapping method to quantify polymer chain reptation in entangled polymer melts.”
From Challenges in Multiscale Modeling of Polymer Dynamics (2013) · cites this paper as [89]
In the citing paper
“In the molecular simulations, the trajectories of polymer chains can be directly mapped onto the tube model, through the Z1 code [89], as discussed in Section 5.1.”
From Challenges in Multiscale Modeling of Polymer Dynamics (2013) · cites this paper as [89]
In the citing paper
“In addition, the predicted G and G for PE (C 500 H 1002 ) also agree well with the atomistic simulations by Stephanou et al. [89] over a broad range of frequencies, ω ∈ [10 4 , 10 8 ] s -1 , cf.”
From Challenges in Multiscale Modeling of Polymer Dynamics (2013) · cites this paper as [89]
Citations
The citation lists are queued
They are fetched later and appear here then.
References 60 · Cited by 118
Research works printed but not linked: 1
- 1987, Polym. Prepr. (Am. Chem. Soc. Div. Polym. Chem.), 28, 185
Metadata
- Authors
- Stephanou, P. S., Baig, C., Tsolou, G., Mavrantzas, V. G., & Kröger, M.
- Affiliations
- University of Patras (GR)
- ETH Zurich (CH)
- Venue
- The Journal of Chemical Physics
- Publisher
- AIP Publishing
- Published
- 2010-03-28
- Volume
- 132
- Issue
- 12
- Pages
- 124904-124904
- ISSN
- 0021-9606 (ISSN-L)
- 1089-7690
- OpenAlex
- W2062458305
- Cited by
- 118
- References
- 60
- Citations by year
- 2026: 1 · 2025: 3 · 2024: 7 · 2023: 7 · 2022: 6 · 2021: 4 · 2020: 9 · 2019: 9 · 2018: 4 · 2017: 9 · 2016: 9 · 2015: 7 · 2014: 7 · 2013: 11 · 2012: 11
- FWCI
- 10.51
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- The Journal of Chemical Physics (publishedVersion)
- PubMed (publishedVersion)
- Ktisis at Cyprus University of Technology (Cyprus University of Technology) (submittedVersion)
- Scholarworks@UNIST (Ulsan National Institute of Science and Technology) (submittedVersion)
- Funders
- Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung
- Topics
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Rheology and Fluid Dynamics Studies
- Physical Sciences › Materials Science › Materials Chemistry › Material Dynamics and Properties
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Advanced Physical and Chemical Molecular Interactions
- Keywords
- entangled polymer melts, tube model, primitive path, tube diameter, constraint release, contour length fluctuations, linear viscoelasticity, zero-shear viscosity, storage and loss moduli, polyethylene, cis-1,4-polybutadiene, trans-1,4-polybutadiene, entanglement network
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Quantifying chain reptation in entangled polymer melts: Topological and dynamical mapping of atomistic simulation results onto the tube model. https://app.cochat.ai/papers/10.1063/1.3361674
- The paper
- Stephanou, P. S., Baig, C., Tsolou, G., Mavrantzas, V. G., & Kröger, M. (2010). Quantifying chain reptation in entangled polymer melts: Topological and dynamical mapping of atomistic simulation results onto the tube model. The Journal of Chemical Physics. https://doi.org/10.1063/1.3361674
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.