The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Electroluminescence of doped organic thin films
Abstract
Electroluminescent (EL) devices are constructed using multilayer organic thin films. The basic structure consists of a hole-transport layer and a luminescent layer. The hole-transport layer is an amorphous diamine film in which the only mobile carrier is the hole. The luminescent layer consists of a host material, 8-hydroxyquinoline aluminum (Alq), which predominantly transports electrons. High radiance has been achieved at an operating voltage of less than 10 V. By doping the Alq layer with highly fluorescent molecules, the EL efficiency has been improved by about a factor of 2 in comparison with the undoped cell. Representative dopants are coumarins and DCMs. The EL quantum efficiency of the doped system is about 2.5%, photon/electron. The EL colors can be readily tuned from the blue-green to orange-red by a suitable choice of dopants as well as by changing the concentration of the dopant. In the doped system the electron-hole recombination and emission zones can be confined to about 50 Å near the hole-transport interface. In the undoped Alq, the EL emission zone is considerably larger due to exciton diffusion. The multilayer doped EL structure offers a simple means for the direct determination of exciton diffusion length.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organic electroluminescent diodes
Tang, C. W., & VanSlyke, S. A. (1987) · Applied Physics Letters · doi:10.1063/1.98799 · Cited by 14,363
Self-citationA Theory of Sensitized Luminescence in Solids
Dexter, D. L. (1953) · The Journal of Chemical Physics · doi:10.1063/1.1699044 · Cited by 9,032
Organic Electroluminescent Device with a Three-Layer Structure
Adachi, C., Tokito, S., Tsutsui, T., & Saito, S. (1988) · Japanese Journal of Applied Physics · doi:10.1143/jjap.27.l713 · Cited by 261
Cited by
Light-emitting diodes based on conjugated polymers
Burroughes, J. H., Bradley, D. D. C., Brown, A. R., Marks, R. N., Mackay, K., Friend, R. H., Burns, P. L., & Holmes, A. B. (1990) · Nature · doi:10.1038/347539a0 · Cited by 11,393
Highly efficient phosphorescent emission from organic electroluminescent devices
Baldo, M. A., O'Brien, D. F., You, Y., Shoustikov, A., Sibley, S., Thompson, M. E., & Forrest, S. R. (1998) · Nature · doi:10.1038/25954 · Cited by 7,204
Electroluminescence in conjugated polymers
Friend, R. H., Gymer, R. W., Holmes, A. B., Burroughes, J. H., Marks, R. N., Taliani, C., Bradley, D. D. C., Santos, D. A. D., Brédas, J. L., Lögdlund, M., et al. (1999) · Nature · doi:10.1038/16393 · Cited by 5,977
Emergence of colloidal quantum-dot light-emitting technologies
Shirasaki, Y., Supran, G. J., Bawendi, M. G., & Bulović, V. (2013) · Nature Photonics · doi:10.1038/nphoton.2012.328 · Cited by 2,635
High-efficiency fluorescent organic light-emitting devices using a phosphorescent sensitizer
Baldo, M. A., Thompson, M. E., & Forrest, S. R. (2000) · Nature · doi:10.1038/35001541 · Cited by 2,193
Metadata
- Authors
- Tang, C. W., VanSlyke, S. A., & Chen, C. H.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 1989-05-01
- Volume
- 65
- Issue
- 9
- Pages
- 3610-3616
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2061352573
- Cited by
- 2,975
- References
- 3
- FWCI
- 16.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.