Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 233

The DOI matches its Crossref record.

Oxidation of HF-treated Si wafer surfaces in air

Gräf, D., Grundner, M., Schulz, R., Mühlhoff, L. · 1990 · Journal of Applied Physics

Abstract

The change in the chemical surface state of polished Si wafers [p-type, (100) oriented] during storage in air at room temperature was investigated for storage times up to half a year. Measurements were performed by x-ray Photoelectron Spectroscopy (XPS) and High Resolution Electron Energy Loss Spectroscopy (HREELS). Immediately after the HF treatment (1 min 5% HF, 2 min water rinse) vibrational spectroscopy (HREELS) shows a predominant coverage of the surface with hydride groups (80%–90% of a ML), which can be inferred from the presence of the stretching (2100 cm−1), scissor (900 cm−1) and bending (640 cm−1) vibrations in the spectra. A slight additional coverage with oxygen is proved by XPS and originates from Si-OH groups (3670 cm−1) and oxygen-related hydrocarbon groups (XPS). These Si-OH groups result from an exchange reaction of Si-F with water during the two-minute water rinse. The development of an oxygen coverage during subsequent storage in air occurs extremely slowly and shows a logarithmic behavior. A monolayer coverage of oxygen (7×1014/cm2) is reached after approximately 7 days of storage in air. HREELS spectra exhibit the concurrent development of the asymmetric Si-O-Si vibration, which indicates that oxygen penetrates the lattice and breaks Si—Si bonds. During this period the Si-O-Si frequency shifts from about 1060 to 1100 cm−1. The penetration of backbonds of Si—H gets evident by broadening of the Si-H stretching vibration and finally by a shift to higher wavenumbers. Chemically shifted components of the Si 2p line (partially oxidized Si) are present with the SiO2−x component (chemical shift ≳3.4 eV) becoming dominant after roughly a week. Further oxidation proceeds essentially by an increase of the SiO2 peak in combination with a steeper slope of the logarithmic growth curve. The SiO2 thickness after half a year is about 8 Å. The frequency of the Si-O-Si vibration shifts up to 1120 cm−1, which can be related to a growing angle of the Si-O-Si bridge. Si—H groups are still present, the final peak position is about 2220 cm−1. The measurements show an extended induction period until the monolayer range of oxide coverage is attained. We ascribe this to the passivation of the surface by hydrogen and to a HF treatment according to Very-Large-Scale-Integration standards.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1063/1.347056

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

Metadata

Authors
Gräf, D., Grundner, M., Schulz, R., & Mühlhoff, L.
Venue
Journal of Applied Physics
Published
1990-11-15
Volume
68
Issue
10
Pages
5155-5161
ISSN
  • 0021-8979 (ISSN-L)
  • 1089-7550
OpenAlex
W2089336921
Cited by
233
References
0
FWCI
11.42
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.