The DOI matches its Crossref record.
Preparation and properties of ferromagnetic carbon-coated Fe, Co, and Ni nanoparticles
Abstract
Carbon-coated iron, cobalt, and nickel particles were produced by an arc discharge process modified in the geometry of the anode and the flow pattern of helium gas. Field emission scanning electron microscopy shows that the resulting material consists of only carbon-coated metal particles without any nanotubes or other unwanted carbon formations present. The diameters of iron, cobalt, and nickel particles range predominantly from 32 to 81 nm, 22 to 64 nm, and 16 to 51 nm, respectively. X-ray diffraction analysis confirmed that the as-made particles are carbon-coated elements rather than metal carbides. High resolution transmission electron microscopy reveals that the as-made cobalt and nickel particles are covered by 1–2 graphitic layers, while iron particles are surrounded by amorphous carbon. When the samples were treated by annealing or immersion into nitric acid, particles completely coated by carbon resisted both postdeposition treatments. However, further graphitization of the carbon coating by either of the two treatments was observed. Particles only partially coated by carbon were not protected, but sintered by annealing or dissolved in the acid. The magnetic properties of the as-made particles were measured by a vibrating sample magnetometer. The values of the saturation magnetic moment per gram of each type of metal particle are 56.21, 114.13, and 34.9 emu/g representing 26%, 71%, and 64% of the saturation moments of the bulk ferromagnetic elements iron, cobalt, and nickel, respectively. All the metal particles were shown to be ferromagnetic with a ratio of remnant to saturation magnetization MR/MS∼0.3 at room temperature (25 °C). In this article the detailed preparation and the properties of these carbon-coated metal particles will be discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Engineering carbon materials from the hydrothermal carbonization process of biomass
Hu, B., Wang, K., Wu, L., Yu, S., Antonietti, M., & Titirici, M. (2010) · Advanced Materials · doi:10.1002/adma.200902812 · Cited by 1,765
Nanotechnology, nanotoxicology, and neuroscience
Suh, W. H., Suslick, K. S., Stucky, G. D., & Suh, Y.-H. (2009) · Progress in Neurobiology · doi:10.1016/j.pneurobio.2008.09.009 · Cited by 406
Nanoparticles as Semi‐Heterogeneous Catalyst Supports
Schätz, A., Reiser, O., & Stark, W. J. (2010) · Chemistry – A European Journal · doi:10.1002/chem.200903462 · Cited by 360
Carbon allotropes: beyond graphite and diamond
Falcao, E. H., & Wudl, F. (2007) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.1693 · Cited by 286
Synthesis of carbon-encapsulated magnetic nanoparticles by pulsed laser irradiation of solution
Park, J. B., Jeong, S. H., Jeong, M. S., Kim, J. Y., & Cho, B. K. (2008) · Carbon · doi:10.1016/j.carbon.2008.05.011 · Cited by 117
Metadata
- Authors
- Jiao, J., Seraphin, S., Wang, X., & Withers, J. C.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 1996-07-01
- Volume
- 80
- Issue
- 1
- Pages
- 103-108
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2003877271
- Cited by
- 246
- References
- 0
- FWCI
- 4.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation and properties of ferromagnetic carbon-coated Fe, Co, and Ni nanoparticles. https://app.cochat.ai/papers/10.1063/1.362765
- The paper
- Jiao, J., Seraphin, S., Wang, X., & Withers, J. C. (1996). Preparation and properties of ferromagnetic carbon-coated Fe, Co, and Ni nanoparticles. Journal of Applied Physics. https://doi.org/10.1063/1.362765
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.