The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Adhesive contact of cylindrical lens and a flat sheet
Abstract
Methods are developed to estimate the adhesion and surface free energies of compliant materials from the contact deformations of cylindrical lenses with flat sheets. Some important differences are found between the cylindrical contact studied here and the widely studied geometry of spherical contact. For example, while the pull-off force is completely independent of the elastic constants (K) of the materials for spherical contacts, the pull-off force for cylindrical contact is proportional to K1/3. Furthermore, for cylindrical contacts the contact width at separation reaches to a value of 39% of the width (a0) at zero load, whereas the corresponding value is 0.63a0 for spherical contact. The feasibility of using cylindrical contacts to estimate the surface and adhesive energies of polymers was investigated using elastomeric polydimethylsiloxane (PDMS) as a model system. PDMS was used in two ways: (1) unmodified and (2) with its surface hydrolyzed with dilute hydrochloric acid. Significant hysteresis of adhesion was observed with the hydrolyzed PDMS surfaces due to H-bonding interactions, which appeared to depend on normal stress.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chaudhury, M. K., & Whitesides, G. M. (1991) · Langmuir · doi:10.1021/la00053a033 · Cited by 658
Self-citation
Cited by
Bioinspired marine antifouling coatings: Status, prospects, and future
Jin, H., Tian, L., Bing, W., Zhao, J., & Ren, L. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100889 · Cited by 585
Vonk Noordegraaf, A., Chin, K. M., Haddad, F., Hassoun, P. M., Hemnes, A. R., Hopkins, S. R., Kawut, S. M., Langleben, D., Lumens, J., & Naeije, R. (2019) · European Respiratory Journal · doi:10.1183/13993003.01900-2018 · Cited by 569
Surface Wrinkles for Smart Adhesion
Chan, E. P., Smith, E. J., Hayward, R. C., & Crosby, A. J. (2008) · Advanced Materials · doi:10.1002/adma.200701530 · Cited by 518
Nanometre-scale rolling and sliding of carbon nanotubes
Falvo, M. R., Taylor II, R. M., Helser, A., Chi, V., Brooks Jr, F. P., Washburn, S., & Superfine, R. (1999) · Nature · doi:10.1038/16662 · Cited by 478
Constraints on Microcontact Printing Imposed by Stamp Deformation
Hui, C. Y., Jagota, A., Lin, Y. Y., & Kramer, E. J. (2002) · Langmuir · doi:10.1021/la0113567 · Cited by 426
Self-citation
Metadata
- Authors
- Chaudhury, M. K., Weaver, T., Hui, C. Y., & Kramer, E. J.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 1996-07-01
- Volume
- 80
- Issue
- 1
- Pages
- 30-37
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2040870807
- Cited by
- 217
- References
- 1
- FWCI
- 10.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.