The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Design, fabrication and measurement of a broadband polarization-insensitive metamaterial absorber based on lumped elements
Abstract
A broadband metamaterial absorber (MA) based on lumped elements is presented, which is composed of the dielectric substrate sandwiched with metal split-coin resonators (SCR) welded with lumped elements and continuous metal film. We simulated, fabricated, and measured the lumped elements MA. Compared with the single SCR structure MA, the composite MA loaded with lumped elements has a wider absorptivity and works in a lower frequency. The experiment results show that the bandwidth of absorption of 90% is about 1.5 GHz and the full width at half maximum (FWHM) can be up to 50%, the absorptivity is also nearly unchanged for different polarizations. The further simulations of the absorptivity of composite MA with different lumped resistances and capacitances indicate that there exist optimal values for lumped resistances and capacitances, where the absorptivity is the highest and the bandwidth is the widest.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metamaterial Electromagnetic Cloak at Microwave Frequencies
Schurig, D., Mock, J. J., Justice, B. J., Cummer, S. A., Pendry, J. B., Starr, A. F., & Smith, D. R. (2006) · Science · doi:10.1126/science.1133628 · Cited by 7,586
Cited by
Broadband Metamaterial Absorbers
Yu, P., Besteiro, L. V., Huang, Y., Wu, J., Fu, L., Tan, H. H., Jagadish, C., Wiederrecht, G. P., Govorov, A. O., & Wang, Z. (2019) · Advanced Optical Materials · doi:10.1002/adom.201800995 · Cited by 644
Metamaterial electromagnetic energy harvester with near unity efficiency
Almoneef, T. S., & Ramahi, O. M. (2015) · Applied Physics Letters · doi:10.1063/1.4916232 · Cited by 253
Metadata
- Authors
- Zhi Cheng, Y., Wang, Y., Nie, Y., Zhou Gong, R., Xiong, X., & Wang, X.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2012-02-15
- Volume
- 111
- Issue
- 4
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W1971438207
- Cited by
- 211
- References
- 1
- FWCI
- 5.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design, fabrication and measurement of a broadband polarization-insensitive metamaterial absorber based on lumped elements. https://app.cochat.ai/papers/10.1063/1.3684553
- The paper
- Zhi Cheng, Y., Wang, Y., Nie, Y., Zhou Gong, R., Xiong, X., & Wang, X. (2012). Design, fabrication and measurement of a broadband polarization-insensitive metamaterial absorber based on lumped elements. Journal of Applied Physics. https://doi.org/10.1063/1.3684553
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.