The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Explosive change in crater properties during high power nanosecond laser ablation of silicon
Abstract
Mass removed from single crystal silicon samples by high irradiance (1×109 to 1×1011 W/cm2) single pulse laser ablation was studied by measuring the resulting crater morphology with a white light interferometric microscope. The craters show a strong nonlinear change in both the volume and depth when the laser irradiance is less than or greater than ≈2.2×1010 W/cm2. Time-resolved shadowgraph images of the ablated silicon plume were obtained over this irradiance range. The images show that the increase in crater volume and depth at the threshold of 2.2×1010 W/cm2 is accompanied by large size droplets leaving the silicon surface, with a time delay ∼300 ns. A numerical model was used to estimate the thickness of the layer heated to approximately the critical temperature. The model includes transformation of liquid metal into liquid dielectric near the critical state (i.e., induced transparency). In this case, the estimated thickness of the superheated layer at a delay time of 200–300 ns shows a close agreement with measured crater depths. Induced transparency is demonstrated to play an important role in the formation of a deep superheated liquid layer, with subsequent explosive boiling responsible for large-particulate ejection.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Chemistry and Physics
(2014) · doi:10.1201/b17118 · Cited by 57,706
Effects of High-Power Laser Radiation
(1971) · Elsevier eBooks · doi:10.1016/b978-0-12-583950-1.x5001-6 · Cited by 1,356
Liquid—vapor phase-change phenomena
Kenning, D. B. R. (1993) · Chemical Engineering Science · doi:10.1016/0009-2509(93)80320-p · Cited by 1,090
Laser–solid interaction in the femtosecond time regime
von der Linde, D., Sokolowski-Tinten, K., & Bialkowski, J. (1997) · Applied Surface Science · doi:10.1016/s0169-4332(96)00611-3 · Cited by 432
Analysis of Multidimensional Conduction Phase Change Via the Enthalpy Model
Shamsundar, N., & Sparrow, E. M. (1975) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.3450375 · Cited by 431
Critical assessment of thermal models for laser sputtering at high fluences
Miotello, A., & Kelly, R. (1995) · Applied Physics Letters · doi:10.1063/1.114912 · Cited by 396
Comments on explosive mechanisms of laser sputtering
Kelly, R., & Miotello, A. (1996) · Applied Surface Science · doi:10.1016/0169-4332(95)00481-5 · Cited by 313
Laser Ablation Mechanisms and Applications
Miller, J. C., & Haglund, R. F. (1991) · Lecture notes in physics · doi:10.1007/bfb0048346 · Cited by 279
Comparison of finite element techniques for solidification problems
Dalhuijsen, A. J., & Śegal, A. (1986) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620231003 · Cited by 213
Laser-pulse sputtering of aluminum: Vaporization, boiling, superheating, and gas-dynamic effects
Peterlongo, A., Miotello, A., & Kelly, R. (1994) · Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics · doi:10.1103/physreve.50.4716 · Cited by 171
Cited by
Nanomaterials via Laser Ablation/Irradiation in Liquid: A Review
Zeng, H., Du, X., Singh, S. C., Kulinich, S. A., Yang, S., He, J., & Cai, W. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201102295 · Cited by 966
Tsuji, T., Iryo, K., Watanabe, N., & Tsuji, M. (2002) · Applied Surface Science · doi:10.1016/s0169-4332(02)00936-4 · Cited by 490
Laser ablation for analytical sampling: what can we learn from modeling?
Bogaerts, A., Chen, Z., Gijbels, R., & Vertes, A. (2003) · Spectrochimica Acta Part B: Atomic Spectroscopy · doi:10.1016/j.sab.2003.08.004 · Cited by 457
Molecular-dynamics study of ablation of solids under femtosecond laser pulses
Perez, D., & Lewis, L. J. (2003) · Physical Review B · doi:10.1103/physrevb.67.184102 · Cited by 328
Zeng, X., Mao, X. L., Greif, R., & Russo, R. E. (2005) · Applied Physics A · doi:10.1007/s00339-004-2963-9 · Cited by 314
Self-citationLaser ablation of a platinum target in water. II. Ablation rate and nanoparticle size distributions
Nichols, W. T., Sasaki, T., & Koshizaki, N. (2006) · Journal of Applied Physics · doi:10.1063/1.2390641 · Cited by 122
Nanosecond Time-Resolved Observations of Laser Ablation of Silver in Water
Tsuji, T., Okazaki, Y., Tsuboi, Y., & Tsuji, M. (2007) · Japanese Journal of Applied Physics · doi:10.1143/jjap.46.1533 · Cited by 120
Wavelength scaling of silicon laser ablation in picosecond regime
Sikora, A., Grojo, D., & Sentis, M. (2017) · Journal of Applied Physics · doi:10.1063/1.4994307 · Cited by 44
Kudryashov, S. I., Nastulyavichus, A. A., Ivanova, A. K., Smirnov, N. A., Khmelnitskiy, R. A., Rudenko, A. A., Saraeva, I. N., Tolordava, E. R., Yu. Kharin, A., Zavestovskaya, I. N., et al. (2019) · Applied Surface Science · doi:10.1016/j.apsusc.2018.11.201 · Cited by 26
Nastulyavichus, A., Smirnov, N., & Kudryashov, S. (2022) · Chinese Physics B · doi:10.1088/1674-1056/ac5602 · Cited by 12
Metadata
- Authors
- Yoo, J. H., Jeong, S. H., Greif, R., & Russo, R. E.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2000-08-01
- Volume
- 88
- Issue
- 3
- Pages
- 1638-1649
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W2069788303
- Cited by
- 303
- References
- 12
- FWCI
- 13.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.