The DOI matches its Crossref record.
On the dual role of the Knudsen layer and unsteady, adiabatic expansion in pulse sputtering phenomena
Abstract
When a surface is bombarded with pulses as from a laser and the number of monolayers sputtered per pulse is sufficiently small, the emitted particles fly freely from the target surface. For yields comparable to 0.5 monolayer in 10 ns, a limited number of gas-phase interactions is known to occur, leading to a Knudsen layer. As a result the particles develop moderate forward peaking (∼cos4 θ) and begin to flow (Mach number, M≊1). It is common, however, for yields to exceed 0.5 monolayer in 10 ns. We show that the resulting gas-phase interactions cause the Knudsen layer to evolve into an unsteady, adiabatic expansion which is formally like a gun which fires a finite charge into an infinite, one-dimensional barrel. An explicit solution can be obtained which has the form a=f1(x/t) and u=f2(x/t), where a is the speed of sound and u is the flow velocity. The solution is assumed to be valid up to a distance where the gas density ρ falls to the critical value ρc where free flight sets in. The particles are then characterized by extents of forward peaking much stronger than ∼cos4 θ (e.g., ∼cos25 θ in work by Namiki et al.) and correspondingly high M (cos25 θ is equivalent to an M near 4). In describing these effects, M and γ (the heat-capacity ratio) take the role of the basic parameters, the knowledge of which is essential for understanding what is happening.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
The Desorption Process in MALDI
Dreisewerd, K. (2003) · Chemical Reviews · doi:10.1021/cr010375i · Cited by 709
Laser ablation for analytical sampling: what can we learn from modeling?
Bogaerts, A., Chen, Z., Gijbels, R., & Vertes, A. (2003) · Spectrochimica Acta Part B: Atomic Spectroscopy · doi:10.1016/j.sab.2003.08.004 · Cited by 457
Zhigilei, L. V., & Garrison, B. J. (2000) · Journal of Applied Physics · doi:10.1063/1.373816 · Cited by 425
Fast intensified-CCD photography of YBa2Cu3O7−x laser ablation in vacuum and ambient oxygen
Geohegan, D. B. (1992) · Applied Physics Letters · doi:10.1063/1.106859 · Cited by 382
Chemical and Spectroscopic Aspects of Polymer Ablation: Special Features and Novel Directions
Lippert, T., & Dickinson, J. T. (2003) · Chemical Reviews · doi:10.1021/cr010460q · Cited by 316
Coulomb explosion in ultrashort pulsed laser ablation ofAl2O3
Stoian, R., Ashkenasi, D., Rosenfeld, A., & Campbell, E. E. B. (2000) · Physical Review B · doi:10.1103/physrevb.62.13167 · Cited by 309
Computer Simulations of Laser Ablation of Molecular Substrates
Zhigilei, L. V., Leveugle, E., Garrison, B. J., Yingling, Y. G., & Zeifman, M. I. (2003) · Chemical Reviews · doi:10.1021/cr010459r · Cited by 289
State resolved studies of photochemical dynamics at surfaces
Zimmermann, F. M., & Ho, W. (1995) · Surface Science Reports · doi:10.1016/0167-5729(96)80001-x · Cited by 277
Metadata
- Authors
- Kelly, R.
- Venue
- The Journal of Chemical Physics
- Publisher
- AIP Publishing
- Published
- 1990-04-15
- Volume
- 92
- Issue
- 8
- Pages
- 5047-5056
- ISSN
- 0021-9606 (ISSN-L)
- 1089-7690
- OpenAlex
- W1972876136
- Cited by
- 225
- References
- 0
- FWCI
- 25.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.