The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Monolayer semiconducting transition metal dichalcogenide alloys: Stability and band bowing
Abstract
The stability and band bowing effects of two-dimensional transition metal dichalcogenide alloys MX2(1−x)X′2x (M = Mo, W, and X, X′ = S, Se, Te) are investigated by employing the cluster expansion method and the special quasi-random structure approach. It is shown that for (S, Se) alloys, there exist stable ordered alloy structures with concentration x equal to 1/3, 1/2, and 2/3, which can be explained by the small lattice mismatch between the constituents and a large additional charge exchange, while no ordered configuration exists for (Se, Te) and (S, Te) alloys at 0 K. The calculated phase diagrams indicate that complete miscibility in the alloys can be achieved at moderate temperatures. The bowing in lattice constant for the alloys is quite small, while the bowing in band gap, and more so in band edge positions, is much more significant. By decomposing the formation of alloy into multiple steps, it is found that the band bowing is the joint effect of volume deformation, chemical difference, and a low-dimensionality enhanced structure relaxation. The direct band gaps in these alloys continuously tunable from 1.8 eV to 1.0 eV, along with the moderate miscibility temperatures, make them good candidates for two-dimensional optoelectronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electronics and optoelectronics of two-dimensional transition metal dichalcogenides
Wang, Q. H., Kalantar-Zadeh, K., Kis, A., Coleman, J. N., & Strano, M. S. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.193 · Cited by 16,374
(2012) · doi:10.1103/physrevb.85.033305 · Cited by 1,307
Cited by
Zhang, X., Qiao, X.-F., Shi, W., Wu, J.-B., Jiang, D.-S., & Tan, P.-H. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00282b · Cited by 1,299
Self-citationBandgap engineering of two-dimensional semiconductor materials
Chaves, A., Azadani, J. G., Alsalman, H., da Costa, D. R., Frisenda, R., Chaves, A. J., Song, S. H., Kim, Y. D., He, D., Zhou, J., et al. (2020) · npj 2D Materials and Applications · doi:10.1038/s41699-020-00162-4 · Cited by 1,296
van der Waals Layered Materials: Opportunities and Challenges
Duong, D. L., Yun, S. J., & Lee, Y. H. (2017) · ACS Nano · doi:10.1021/acsnano.7b07436 · Cited by 626
One-pot growth of two-dimensional lateral heterostructures via sequential edge-epitaxy
Sahoo, P. K., Memaran, S., Xin, Y., Balicas, L., & Gutiérrez, H. R. (2018) · Nature · doi:10.1038/nature25155 · Cited by 549
Li, H., Duan, X., Wu, X., Zhuang, X., Zhou, H., Zhang, Q., Zhu, X., Hu, W., Ren, P., Guo, P., et al. (2014) · Journal of the American Chemical Society · doi:10.1021/ja500069b · Cited by 520
Metadata
- Authors
- Kang, J., Tongay, S., Li, J., & Wu, J.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2013-04-08
- Volume
- 113
- Issue
- 14
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W1971039299
- Cited by
- 247
- References
- 2
- FWCI
- 7.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.