Magnetic shielding of Hall thrusters at high discharge voltages
The DOI matches its Crossref record.
Abstract
A series of numerical simulations and experiments have been performed to assess the effectiveness of magnetic shielding in a Hall thruster operating in the discharge voltage range of 300–700 V (Isp ≈ 2000–2700 s) at 6 kW, and 800 V (Isp ≈ 3000) at 9 kW. At 6 kW, the magnetic field topology with which highly effective magnetic shielding was previously demonstrated at 300 V has been retained for all other discharge voltages; only the magnitude of the field has been changed to achieve optimum thruster performance. It is found that magnetic shielding remains highly effective for all discharge voltages studied. This is because the channel is long enough to allow hot electrons near the channel exit to cool significantly upon reaching the anode. Thus, despite the rise of the maximum electron temperature in the channel with discharge voltage, the electrons along the grazing lines of force remain cold enough to eliminate or reduce significantly parallel gradients of the plasma potential near the walls. Computed maximum erosion rates in the range of 300–700 V are found not to exceed 10−2 mm/kh. Such rates are ∼3 orders of magnitude less than those observed in the unshielded version of the same thruster at 300 V. At 9 kW and 800 V, saturation of the magnetic circuit did not allow for precisely the same magnetic shielding topology as that employed during the 6-kW operation since this thruster was not designed to operate at this condition. Consequently, the maximum erosion rate at the inner wall is found to be ∼1 order of magnitude higher (∼10−1 mm/kh) than that at 6 kW. At the outer wall, the ion energy is found to be below the sputtering yield threshold so no measurable erosion is expected.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Electric propulsion for satellites and spacecraft: established technologies and novel approaches
Mazouffre, S. (2016) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/25/3/033002 · Cited by 587
Tutorial: Physics and modeling of Hall thrusters
Boeuf, J.-P. (2017) · Journal of Applied Physics · doi:10.1063/1.4972269 · Cited by 504
Latest progress in Hall thrusters plasma modelling
Taccogna, F., & Garrigues, L. (2019) · Reviews of Modern Plasma Physics · doi:10.1007/s41614-019-0033-1 · Cited by 103
“Calculations of wall properties have revealed a decrease of erosion by 3 orders of magnitude, the quasi-absence of erosion in the MS configuration has been later experimentally confirmed (Mikellides et al. 2014b).”
BackgroundReview of High-Power Electrostatic and Electrothermal Electric Propulsion
Jovel, D. R., Walker, M. L. R., & Herman, D. (2022) · Journal of Propulsion and Power · doi:10.2514/1.b38594 · Cited by 38
Kinetic plasma dynamics in a radial model of a Hall thruster with a curved magnetic field
Marín-Cebrián, A., Domínguez-Vázquez, A., Fajardo, P., & Ahedo, E. (2022) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/ac9a6b · Cited by 7
Metadata
- Authors
- Mikellides, I. G., Hofer, R. R., Katz, I., & Goebel, D. M.
- Venue
- Journal of Applied Physics
- Publisher
- AIP Publishing
- Published
- 2014-08-06
- Volume
- 116
- Issue
- 5
- ISSN
- 0021-8979 (ISSN-L)
- 1089-7550
- OpenAlex
- W1981239627
- Cited by
- 52
- References
- 0
- FWCI
- 3.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Magnetic shielding of Hall thrusters at high discharge voltages. https://app.cochat.ai/papers/10.1063/1.4892160
- The paper
- Mikellides, I. G., Hofer, R. R., Katz, I., & Goebel, D. M. (2014). Magnetic shielding of Hall thrusters at high discharge voltages. Journal of Applied Physics. https://doi.org/10.1063/1.4892160
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.