Nonlinear and multilevel resistive switching memory in Ni/Si3N4/Al2O3/TiN structures
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
In this letter, we extensively investigate the nonlinear resistive switching characteristics of Si3N4-based resistive random access memory (RRAM) devices that contain an Al2O3 tunnel barrier layer to alleviate sneak path currents in the cross-point array structure. When the compliance current (ICC) exceeds 1 mA, the Ni/Si3N4/TiN device shows both unipolar and bipolar switching with Ohmic characteristics in the low resistance state. Nonlinear resistive switching characteristics were observed for this device when ICC was ≤100 μA. We fabricated Si3N4/Al2O3 bilayer devices with different tunnel barrier layer thickness and characterized their nonlinear characteristics and failure resistance during the reset process. Furthermore, we obtained stable multiple resistance levels in the devices by varying ICC and the stop voltage for the set and reset switching, respectively. Our results suggest that an Al2O3 tunnel barrier layer embedded in Si3N4-based RRAM devices offers considerable potential to realize high-density cross-point memory array applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges
Waser, R., Dittmann, R., Staikov, G., & Szot, K. (2009) · Advanced Materials · doi:10.1002/adma.200900375 · Cited by 5,080
Cited by
Analog Synaptic Behavior of a Silicon Nitride Memristor
Kim, S., Kim, H., Hwang, S., Kim, M.-H., Chang, Y.-F., & Park, B.-G. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11191 · Cited by 252
Self-citationRyu, J.-H., & Kim, S. (2020) · Chaos, Solitons & Fractals · doi:10.1016/j.chaos.2020.110236 · Cited by 87
Self-citationAguirre, F. L., Gomez, N. M., Pazos, S. M., Palumbo, F., Suñé, J., & Miranda, E. (2021) · Journal of Low Power Electronics and Applications · doi:10.3390/jlpea11010009 · Cited by 14
“However, nonlinearity factors well below 10 have been obtained by optimizing the device fabrication process [31,32] and have also been addressed through specific training [33,34] and voltage mapping [26] methodologies.”
Method
Metadata
- Authors
- Kim, S., & Park, B.-G.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 2016-05-23
- Volume
- 108
- Issue
- 21
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W2404161678
- Cited by
- 76
- References
- 1
- FWCI
- 5.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.