Highly effective activation of Mg-implanted p-type GaN by ultra-high-pressure annealing
The DOI matches its Crossref record.
Abstract
A high activation ratio of acceptors to Mg ions implanted into a homoepitaxial GaN layer was achieved through an ultra-high-pressure annealing (UHPA) process. Capless annealing under a nitrogen pressure of 1 GPa in a temperature range of 1573–1753 K activated acceptors without thermally decomposing the GaN layer. Conventional rapid thermal annealing leads to a serious decomposition at 1573 K, even with an AlN protective cap. The sample annealed at 1673 K under UHPA exhibited very intense cathodoluminescence in near-band edge and donor-acceptor-pair band emissions. The intensities were over one order of magnitude higher than those of the sample treated by conventional annealing. A Hall-effect measurement was obtained in the temperature range of 275–500 K for the UHPA sample. The obtained hole concentration and mobility at 300 K were 3.6 × 1016 cm−3 and 24.1 cm2 V−1 s−1, respectively. The mobility value was close to that of an epitaxial p-type GaN with the same doping concentration. An Arrhenius plot of hole concentrations showed that the acceptor concentration and ionization energy were separately estimated to be (2.6 ± 0.8) × 1018 cm−3 and 212 ± 5 meV, respectively. By comparing the Mg concentrations obtained from secondary ion mass spectrometry, the acceptor activation ratio (acceptor concentration/Mg concentration) of the UHPA samples exceeded 70%. These results suggest that the UHPA process as a postimplantation annealing technique is promising for the fabrication of GaN-based power devices with selective area doping.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
GaN-based power devices: Physics, reliability, and perspectives
Meneghini, M., De Santi, C., Abid, I., Buffolo, M., Cioni, M., Khadar, R. A., Nela, L., Zagni, N., Chini, A., Medjdoub, F., et al. (2021) · Journal of Applied Physics · doi:10.1063/5.0061354 · Cited by 723
Metadata
- Authors
- Sakurai, H., Omori, M., Yamada, S., Furukawa, Y., Suzuki, H., Narita, T., Kataoka, K., Horita, M., Bockowski, M., Suda, J., & Kachi, T.
- Venue
- Applied Physics Letters
- Publisher
- AIP Publishing
- Published
- 2019-09-30
- Volume
- 115
- Issue
- 14
- ISSN
- 0003-6951 (ISSN-L)
- 1077-3118
- OpenAlex
- W2977855466
- Cited by
- 182
- References
- 0
- FWCI
- 12.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.