The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
The lubrication force between two viscous drops
Abstract
The hydrodynamic force resisting the relative motion of two unequal drops moving along their line of centers is determined for Stokes flow conditions. The drops are assumed to be in near-contact and to have sufficiently high interfacial tension that they remain spherical. The squeeze flow in the narrow gap between the drops is analyzed using lubrication theory, and the flow within the drops near the axis of symmetry is analyzed using a boundary integral technique. The two flows are coupled through the nonzero tangential stress and velocity at the interface. Depending on the ratio of drop viscosity to that of the continuous phase, and also on the ratio of the distance between the drops to their reduced radius, three possible flow situations arise, corresponding to nearly rigid drops, drops with partially mobile interfaces, and drops with fully mobile interfaces. The results for the resistance functions are in good agreement with an earlier series solution using bispherical coordinates. These results have important implications for droplet collisions and coalescence.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Introduction to Fluid Mechanics
Batchelor, G. K., & Young, A. D. (1968) · Journal of Applied Mechanics · doi:10.1115/1.3601282 · Cited by 1,009
Cited by
A literature review on mechanisms and models for the coalescence process of fluid particles
Liao, Y., & Lucas, D. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2010.02.020 · Cited by 663
Breakage and coalescence models for drops in turbulent dispersions
Tsouris, C., & Tavlarides, L. L. (1994) · AIChE Journal · doi:10.1002/aic.690400303 · Cited by 544
Wörner, M. (2012) · Microfluidics and Nanofluidics · doi:10.1007/s10404-012-0940-8 · Cited by 438
Comte, F. D., & Lesieur, M. (1996) · Journal of Fluid Mechanics · doi:10.1017/s0022112096008221 · Cited by 415
Ratke, L., & Diefenbach, S. (1995) · Materials Science and Engineering: R: Reports · doi:10.1016/0927-796x(95)00180-8 · Cited by 387
Metadata
- Authors
- Davis, R. H., Schonberg, J. A., & Rallison, J. M.
- Venue
- Physics of Fluids A: Fluid Dynamics
- Publisher
- AIP Publishing
- Published
- 1989-01-01
- Volume
- 1
- Issue
- 1
- Pages
- 77-81
- ISSN
- 0899-8213 (ISSN-L)
- OpenAlex
- W1999702404
- Cited by
- 302
- References
- 1
- FWCI
- 5.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.