The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Turbulent boundary layer control utilizing the Lorentz force
Abstract
Direct numerical simulations (DNS) of a turbulent channel flow at low Reynolds number (Reτ=100,200,400, where Reτ is the Reynolds number based on the wall-shear velocity and channel half-width) are carried out to examine the effectiveness of using the Lorentz force to reduce skin friction. The Lorentz force is created by embedding electrodes and permanent magnets in the flat surface over which the flow passes. Both open-loop and closed-loop control schemes are examined. For open-loop control, both temporally and spatially oscillating Lorentz forces in the near-wall region are tested. It is found that skin-friction drag can be reduced by approximately 40% if a temporally oscillating spanwise Lorentz force is applied to a Reτ=100 channel flow. However, the power to generate the required Lorentz force is an order of magnitude larger than the power saved due to the reduced drag. Simulations were carried out at higher Reynolds numbers (Reτ=200,400) to determine whether efficiency, defined as the ratio of the power saved to the power used, improves with increasing Reynolds number. We found that the efficiency decreases with increasing Reynolds number. An idealized wall–normal Lorentz force is effected by detecting the near-wall turbulent events responsible for high-skin friction. It is found that the drag can be significantly reduced with a greater efficiency than that produced by the spanwise open-loop control approach. This result suggests that, when employed with a closed-loop control scheme, the Lorentz force might result in a net decrease of power required to propel objects through viscous conducting fluids.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Turbulence statistics in fully developed channel flow at low Reynolds number
Kim, J., Moin, P., & Moser, R. (1987) · Journal of Fluid Mechanics · doi:10.1017/s0022112087000892 · Cited by 4,873
Self-citation
Cited by
Componentwise energy amplification in channel flows
JOVANOVIĆ, M. R., & BAMIEH, B. (2005) · Journal of Fluid Mechanics · doi:10.1017/s0022112005004295 · Cited by 450
Critical assessment of turbulent drag reduction through spanwise wall oscillations
QUADRIO, M., & RICCO, P. (2004) · Journal of Fluid Mechanics · doi:10.1017/s0022112004001855 · Cited by 312
Metadata
- Authors
- Berger, T. W., Kim, J., Lee, C., & Lim, J.
- Venue
- Physics of Fluids
- Publisher
- AIP Publishing
- Published
- 2000-03-01
- Volume
- 12
- Issue
- 3
- Pages
- 631-649
- ISSN
- 1070-6631 (ISSN-L)
- 1089-7666
- OpenAlex
- W2124182987
- Cited by
- 238
- References
- 1
- FWCI
- 8.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Turbulent boundary layer control utilizing the Lorentz force. https://app.cochat.ai/papers/10.1063/1.870270
- The paper
- Berger, T. W., Kim, J., Lee, C., & Lim, J. (2000). Turbulent boundary layer control utilizing the Lorentz force. Physics of Fluids. https://doi.org/10.1063/1.870270
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.