Effects of heating on some soil physical properties related to its hydrological behaviour in two north-western Spanish soils
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Two forest soils rich in organic matter but differing in texture (sandy loam and silty loam) were heated under controlled laboratory conditions in order to examine the consequences of the heating effect that accompanies the passage of a fire on the physical properties of soil. Three samples of both soils were heated for 30 min in a muffle furnace at temperatures of 25, 170, 220, 380 and 460°C. At each temperature, the following parameters were determined: dry aggregate size distribution, water aggregate stability, total porosity, pore size distribution, water repellency and hydraulic conductivity. Heating the soils at 170 and 220°C caused no significant changes in aggregate size distribution or total porosity but increased water aggregate stability and the volume of pores 0.2–30 μm. Also, increased water repellency and strongly decreased the hydraulic conductivity. All parameters underwent much more dramatic changes at 380 and 460°C that can be ascribed to the combustion of organic matter. At such temperatures, water repellency was destroyed and the low hydraulic conductivity can be attributed to the aggregate breakdown observed under dry and wet conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organic matter and water-stable aggregates in soils
TISDALL, J. M., & OADES, J. M. (1982) · Journal of Soil Science · doi:10.1111/j.1365-2389.1982.tb01755.x · Cited by 6,267
GIOVANNINI, G., LUCCHESI, S., & GIACHETTI, M. (1988) · Soil Science · doi:10.1097/00010694-198810000-00006 · Cited by 262
Cited by
Fire effects on soil aggregation: A review
Mataix-Solera, J., Cerdà, A., Arcenegui, V., Jordán, A., & Zavala, L. M. (2011) · Earth-Science Reviews · doi:10.1016/j.earscirev.2011.08.002 · Cited by 701
Effects of prescribed fires on soil properties: A review
Alcañiz, M., Outeiro, L., Francos, M., & Úbeda, X. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2017.09.144 · Cited by 452
Doerr, S. H., Shakesby, R. A., Blake, W. H., Chafer, C. J., Humphreys, G. S., & Wallbrink, P. J. (2006) · Journal of Hydrology · doi:10.1016/j.jhydrol.2005.06.038 · Cited by 341
GOEBEL, M.-O., BACHMANN, J., REICHSTEIN, M., JANSSENS, I. A., & GUGGENBERGER, G. (2011) · Global Change Biology · doi:10.1111/j.1365-2486.2011.02414.x · Cited by 257
Hydrological response of a small catchment burned by experimental fire
Stoof, C. R., Vervoort, R. W., Iwema, J., van den Elsen, E., Ferreira, A. J. D., & Ritsema, C. J. (2012) · Hydrology and Earth System Sciences · doi:10.5194/hess-16-267-2012 · Cited by 194
“(wild)fires where soil physical changes are more pronounced (Garcı́a-Corona et al., 2004; Stoof et al., 2010).”
Background
Metadata
- Authors
- García-Corona, R., Benito, E., de Blas, E., & Varela, M. E.
- Venue
- International Journal of Wildland Fire
- Publisher
- CSIRO Publishing
- Published
- 2004-06-30
- Volume
- 13
- Issue
- 2
- Pages
- 195-199
- ISSN
- 1049-8001 (ISSN-L)
- 1448-5516
- OpenAlex
- W1487001711
- Cited by
- 133
- References
- 2
- FWCI
- 4.72
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.