The DOI matches its Crossref record; 86 of the 86 references it cites were found in a registry or an index.
Metal halide perovskite light emitters
Open accessAbstract
Twenty years after layer-type metal halide perovskites were successfully developed, 3D metal halide perovskites (shortly, perovskites) were recently rediscovered and are attracting multidisciplinary interest from physicists, chemists, and material engineers. Perovskites have a crystal structure composed of five atoms per unit cell (ABX 3 ) with cation A positioned at a corner, metal cation B at the center, and halide anion X at the center of six planes and unique optoelectronic properties determined by the crystal structure. Because of very narrow spectra (full width at half-maximum ≤20 nm), which are insensitive to the crystallite/grain/particle dimension and wide wavelength range (400 nm ≤ λ ≤ 780 nm), perovskites are expected to be promising high-color purity light emitters that overcome inherent problems of conventional organic and inorganic quantum dot emitters. Within the last 2 y, perovskites have already demonstrated their great potential in light-emitting diodes by showing high electroluminescence efficiency comparable to those of organic and quantum dot light-emitting diodes. This article reviews the progress of perovskite emitters in two directions of bulk perovskite polycrystalline films and perovskite nanoparticles, describes current challenges, and suggests future research directions for researchers to encourage them to collaborate and to make a synergetic effect in this rapidly emerging multidisciplinary field.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Protesescu, L., Yakunin, S., Bodnarchuk, M. I., Krieg, F., Caputo, R., Hendon, C. H., Yang, R. X., Walsh, A., & Kovalenko, M. V. (2015) · Nano Letters · doi:10.1021/nl5048779 · Cited by 9,209
Highly efficient organic light-emitting diodes from delayed fluorescence
Uoyama, H., Goushi, K., Shizu, K., Nomura, H., & Adachi, C. (2012) · Nature · doi:10.1038/nature11687 · Cited by 8,188
Highly efficient phosphorescent emission from organic electroluminescent devices
Baldo, M. A., O'Brien, D. F., You, Y., Shoustikov, A., Sibley, S., Thompson, M. E., & Forrest, S. R. (1998) · Nature · doi:10.1038/25954 · Cited by 7,204
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Self-citationBright light-emitting diodes based on organometal halide perovskite
Tan, Z.-K., Moghaddam, R. S., Lai, M. L., Docampo, P., Higler, R., Deschler, F., Price, M., Sadhanala, A., Pazos, L. M., Credgington, D., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.149 · Cited by 4,450
Light-emitting diodes made from cadmium selenide nanocrystals and a semiconducting polymer
Colvin, V. L., Schlamp, M. C., & Alivisatos, A. P. (1994) · Nature · doi:10.1038/370354a0 · Cited by 4,238
Nearly 100% internal phosphorescence efficiency in an organic light-emitting device
Adachi, C., Baldo, M. A., Thompson, M. E., & Forrest, S. R. (2001) · Journal of Applied Physics · doi:10.1063/1.1409582 · Cited by 3,458
Electroluminescence of doped organic thin films
Tang, C. W., VanSlyke, S. A., & Chen, C. H. (1989) · Journal of Applied Physics · doi:10.1063/1.343409 · Cited by 2,975
Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes
Cho, H., Jeong, S.-H., Park, M.-H., Kim, Y.-H., Wolf, C., Lee, C.-L., Heo, J. H., Sadhanala, A., Myoung, N., Yoo, S., et al. (2015) · Science · doi:10.1126/science.aad1818 · Cited by 2,925
Self-citationQuantum Dot Light‐Emitting Diodes Based on Inorganic Perovskite Cesium Lead Halides (CsPbX3)
Song, J., Li, J., Li, X., Xu, L., Dong, Y., & Zeng, H. (2015) · Advanced Materials · doi:10.1002/adma.201502567 · Cited by 2,896
Cited by
Fu, Y., Zhu, H., Chen, J., Hautzinger, M. P., Zhu, X.-Y., & Jin, S. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0080-9 · Cited by 934
Metal-free three-dimensional perovskite ferroelectrics
Ye, H.-Y., Tang, Y.-Y., Li, P.-F., Liao, W.-Q., Gao, J.-X., Hua, X.-N., Cai, H., Shi, P.-P., You, Y.-M., & Xiong, R.-G. (2018) · Science · doi:10.1126/science.aas9330 · Cited by 814
Yao, J.-S., Ge, J., Han, B.-N., Wang, K.-H., Yao, H.-B., Yu, H.-L., Li, J.-H., Zhu, B.-S., Song, J.-Z., Chen, C., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b11955 · Cited by 549
Improving the Stability of Metal Halide Perovskite Materials and Light‐Emitting Diodes
Cho, H., Kim, Y., Wolf, C., Lee, H., & Lee, T. (2018) · Advanced Materials · doi:10.1002/adma.201704587 · Cited by 470
Self-citationRajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
Metadata
- Authors
- Kim, Y.-H., Cho, H., & Lee, T.-W.
- Venue
- Proceedings of the National Academy of Sciences
- Published
- 2016-09-27
- Volume
- 113
- Issue
- 42
- Pages
- 11694-11702
- ISSN
- 0027-8424 (ISSN-L)
- 1091-6490
- OpenAlex
- W2525292295
- Cited by
- 549
- References
- 86
- FWCI
- 36.74
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Metal halide perovskite light emitters. https://app.cochat.ai/papers/10.1073/pnas.1607471113
- The paper
- Kim, Y.-H., Cho, H., & Lee, T.-W. (2016). Metal halide perovskite light emitters. Proceedings of the National Academy of Sciences. https://doi.org/10.1073/pnas.1607471113
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
