The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Invited paper Survey of quantitative feedback theory (QFT)
Abstract
QFT is an engineering design theory devoted to the practical design of feedback control systems. The foundation of QFT is that feedback is needed in control only when plant (P), parameter and/or disturbance (D) uncertainties (sets P; = {P}, D = {D}) exceed the acceptable (A) system performance uncertainty (set A ={A}). The principal properties of QFT are as follows. (1) The amount of feedback needed is tuned to the (P,D,A); sets. If A/ 'exceeds’ (P,D)feedback is not needed at all. (2) The simplest modelling is used: (a) command, disturbance and sensor noise inputs, and (b) the available sensing points and the defined outputs. No special controllability test is needed in either linear or non-linear plants. It is inherent in the design procedure. There is no observability problem because uncertainty is included. The number of independent sensors determines the number of independent loop transmissions (Li,,), the functions which provide the benefits of feedback. (3) The simplest mathematical tools have been found most useful—primarily frequency response. The uncertainties are expressed as sets in the complex plane. The need for the larger P,D sets to be squeezed into the smaller A set results in bounds on the Li(jω)in the complex plane. In the more complex systems a key problem is the division of the 'feedback burden’ among the available L^jco). Point-by-point frequency synthesis tremendously simplifies this problem. This is also true for highly uncertain non-linear and time-varying plants which are converted into rigorously equivalent linear time invariant plant sets and A or disturbance sets with respect to the acceptable output set si. Fixed points theory justifies the equivalence. (4) Design trade-offs are highly transparent in the frequency domain, between design complexity and cost of feedback (primarily bandwidth), sensor noise levels, plant saturation levels, number of sensors needed, relative sizes of P,A and cost of feedback. The designer sees the trade-offs between these factors as he proceeds and can decide according to their relative importance in his particular situation. QFT design techniques with these properties have been developed step by step for: (i) highly uncertain linear time invariant (LTI) SISO single- and multiple-loop systems, MIMO single-loop matrix and multiple-loop matrix systems; and (ii) non-linear and time-varying SISO and MIMO plants, and to a more limited extent for plants with distributed control inputs and sensors. QFT has also been developed for single- and multiple-loop dithered non-linear (adaptive) systems with LTI plants, and for a special class (FORE) of non-linear compensation. New techniques have been found for handling non-minimum-phase (NMP) MIMO plants, plants with both zeros and poles in the right half-plane and LTI plants with incidental hard non-linearities such as saturation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Network analysis and feedback amplifier design
Bode, H. W. (1945) · Virtual Defense Library (Ministerio de Defensa) · Cited by 3,119
Proceedings of the 1999 American Control Conference
(1999) · Proceedings of the 1999 American Control Conference (Cat. No. 99CH36251) · doi:10.1109/acc.1999.782304 · Cited by 2,898
Control system synthesis: A factorization approach
(1986) · Automatica · doi:10.1016/0005-1098(86)90022-1 · Cited by 2,169
A synthesis theory for a class of multiple-loop systems with plant uncertainty
Horowitz, I. M., & Wang, T.-S. (1979) · International Journal of Control · doi:10.1080/00207177908922725 · Cited by 10
Self-citationLinear Model Identification for Multivariable Continuous Time Systems
Boje, E. (1988) · IFAC Proceedings Volumes · doi:10.1016/s1474-6670(17)54769-2 · Cited by 4
Cited by
State-dependent Riccati equation techniques: an overview
Cloutier, J. R. (1997) · Proceedings of the 1997 American Control Conference (Cat. No.97CH36041) · doi:10.1109/acc.1997.609663 · Cited by 437
A˚ström, K. J., & Kumar, P. R. (2014) · Automatica · doi:10.1016/j.automatica.2013.10.012 · Cited by 304
Quantitative-fuzzy Controller Design for Multivariable Systems with Uncertainty
Gharib, M. R., & Daneshvar, A. (2019) · International Journal of Control, Automation and Systems · doi:10.1007/s12555-018-0567-y · Cited by 15
Khan, S., Bendoukha, S., Naeem, W., & Iqbal, J. (2019) · Advances in Electrical and Electronic Engineering · doi:10.15598/aeee.v17i3.3031 · Cited by 13
Metadata
- Authors
- HOROWITZ, I.
- Venue
- International Journal of Control
- Publisher
- Informa UK Limited
- Published
- 1991-02
- Volume
- 53
- Issue
- 2
- Pages
- 255-291
- ISSN
- 0020-7179 (ISSN-L)
- 1366-5820
- OpenAlex
- W2020262982
- Cited by
- 252
- References
- 5
- FWCI
- 16.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Invited paper Survey of quantitative feedback theory (QFT). https://app.cochat.ai/papers/10.1080/00207179108953619
- The paper
- HOROWITZ, I. (1991). Invited paper Survey of quantitative feedback theory (QFT). International Journal of Control. https://doi.org/10.1080/00207179108953619
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.