High Density Polyethylene/Paraffin Composites as Form-stable Phase Change Material for Thermal Energy Storage
The DOI matches its Crossref record.
Abstract
This article focuses on the preparation and thermo-physical properties of paraffin/high density polyethylene (HDPE) composites as form-stable solid-liquid phase change material (PCM) for thermal energy storage. In the paraffin/HDPE blend, the paraffin (P) dispersed into the HDPE serves as a latent heat storage material when the HDPE, as a supporting material, prevents the melted paraffin leakage thanks to its structural strength. Therefore, this type composite is form-stable and can be used as a PCM without encapsulation for thermal energy storage. In this study, two paraffins with melting temperatures of 48°C–50°C and 63°C–65°C were used. The mass percentages of paraffins in the composites could go high as 76% without any seepage of the paraffin in melted state. The dispersion of the paraffin into the network of the solid HDPE was investigated using scanning electronic microscope (SEM). The melting temperatures and latent heats of the form-stable P1/HDPE and P2/HDPE composite PCMs were determined as 44.32°C and 61.66°C, and 179.63 and 198.14 Jg−1, by the technique of differential scanning calorimetry (DSC), respectively. Furthermore, the thermal conductivity of the composite PCMs were improved as about 33.3% for the P1/HDPE and 52.3% for the P2/HDPE by introducing the expanded and exfoliated graphite to the samples in the ratio of 3 wt%. The results reveal that the prepared form-stable composite PCMs have great potential for thermal energy storage applications in terms of their satisfactory thermal properties, improved thermal conductivity and cost-efficiency because of no encapsulation for enhancing heat transfer in paraffin.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Phase change materials for thermal energy storage
Pielichowska, K., & Pielichowski, K. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.005 · Cited by 2,106
Umair, M. M., Zhang, Y., Iqbal, K., Zhang, S., & Tang, B. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.11.017 · Cited by 852
Latent Heat Thermal Energy Storage Systems with Solid–Liquid Phase Change Materials: A Review
Zhang, N., Yuan, Y., Cao, X., Du, Y., Zhang, Z., & Gui, Y. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700753 · Cited by 504
Microencapsulated n-octacosane as phase change material for thermal energy storage
Sarı, A., Alkan, C., Karaipekli, A., & Uzun, O. (2009) · Solar Energy · doi:10.1016/j.solener.2009.05.008 · Cited by 363
Advanced thermal systems driven by paraffin-based phase change materials – A review
Gulfam, R., Zhang, P., & Meng, Z. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.01.114 · Cited by 351
Metadata
- Authors
- Kaygusuz, K., & Sari, A.
- Venue
- Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Publisher
- Informa UK Limited
- Published
- 2007-02
- Volume
- 29
- Issue
- 3
- Pages
- 261-270
- ISSN
- 1556-7036 (ISSN-L)
- 1556-7230
- OpenAlex
- W2000582153
- Cited by
- 75
- References
- 0
- FWCI
- 3.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High Density Polyethylene/Paraffin Composites as Form-stable Phase Change Material for Thermal Energy Storage. https://app.cochat.ai/papers/10.1080/009083190957568
- The paper
- Kaygusuz, K., & Sari, A. (2007). High Density Polyethylene/Paraffin Composites as Form-stable Phase Change Material for Thermal Energy Storage. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. https://doi.org/10.1080/009083190957568
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.