The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
The influence of grain boundary inclination on the structure and energy of σ = 3 grain boundaries in copper
Abstract
In a combined theoretical and experimental study, the energies and structures of σ = 3, [011] tilt boundaries in Cu were investigated. Equilibrium atomistic structures and grain-boundary energies were calculated by static energy minimization using an embedded-atom potential. Cu bicrystals of the same boundary orientations were fabricated by welding of Cu single crystals. Grain-boundary energies were measured by the thermal grooving technique. The atomistic structure of the {211} twin boundary was investigated by high-resolution transmission electron microscopy (HRTEM). The calculated grain-boundary energies γb plotted against the inclination of the boundary plane show a minimum for the {111} twin boundary and a second minimum at an inclination of about 82° to the {111} boundary. The calculated dependence of γb on inclination is confirmed by the measured energies over the entire range. Common to all calculated boundary structures is a microfaceting into {111} and {211} twin facets. The structures calculated for grain boundaries around the second energy minimum show significant atomic rearrangements extending over several planes normal to the boundary together with large translations. A striking feature of these structures is a bending of the {111} planes that run continuously through the boundary. This is confirmed by HRTEM. The structures are explained in terms of a rhombohedral 9R phase of Cu forming a thin (1–2 nm) layer at the boundary.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mullins, W. W. (1957) · Journal of Applied Physics · doi:10.1063/1.1722742 · Cited by 2,629
Cited by
Zhang, Z., Sheng, H., Wang, Z., Gludovatz, B., Zhang, Z., George, E. P., Yu, Q., Mao, S. X., & Ritchie, R. O. (2017) · Nature Communications · doi:10.1038/ncomms14390 · Cited by 664
〈110〉 symmetric tilt grain-boundary structures in fcc metals with low stacking-fault energies
Rittner, J. D., & Seidman, D. N. (1996) · Physical Review B · doi:10.1103/physrevb.54.6999 · Cited by 379
Metadata
- Authors
- Wolf, U., Ernst, F., Muschik, T., Finnis, M. W., & Fischmeister, H. F.
- Venue
- Philosophical Magazine A
- Publisher
- Informa UK Limited
- Published
- 1992-12
- Volume
- 66
- Issue
- 6
- Pages
- 991-1016
- ISSN
- 0141-8610 (ISSN-L)
- 1460-6992
- OpenAlex
- W2031916441
- Cited by
- 205
- References
- 1
- FWCI
- 7.77
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The influence of grain boundary inclination on the structure and energy of σ = 3 grain boundaries in copper. https://app.cochat.ai/papers/10.1080/01418619208248003
- The paper
- Wolf, U., Ernst, F., Muschik, T., Finnis, M. W., & Fischmeister, H. F. (1992). The influence of grain boundary inclination on the structure and energy of σ = 3 grain boundaries in copper. Philosophical Magazine A. https://doi.org/10.1080/01418619208248003
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.