The DOI matches its Crossref record.
Surface temperature and water vapour retrieval from MODIS data
Abstract
This paper gives operational algorithms for retrieving sea (SST), land surface temperature (LST) and total atmospheric water vapour content (W) using Moderate Resolution Imaging Spectroradiometer (MODIS) data. To this end, the MODTRAN 3.5 radiative transfer program was used to predict radiances for MODIS channels 31, 32, 2, 17, 18 and 19. To analyse atmospheric effects, a simulation with a set of radiosonde observations was used to cover the variability of surface temperature and water vapour concentration on a worldwide scale. These simulated data were split into two sets (DB1 and DB2), the first one (DB1) was used to fit the coefficients of the algorithms, while the second one (DB2) was used to test the fitted coefficients. The results show that the algorithms are capable of producing SST and LST with a standard deviation of 0.3 K and 0.7 K if the satellite data are error free. The LST product has been validated with in situ data from a field campaign carried out in the Mississippi (USA), the results show for the LST algorithm proposed a root mean square error lower than 0.5K. Regarding water vapour content, a ratio technique is proposed, which is capable of estimating W from the absorbing channels at 0.905, 0.936, and 0.94,µm, and the atmospheric window channel at 0.865,µm, with a standard deviation (in the comparison with radiosonde observations) of 0.4 g cm−2.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Satellite-derived land surface temperature: Current status and perspectives
Li, Z.-L., Tang, B.-H., Wu, H., Ren, H., Yan, G., Wan, Z., Trigo, I. F., & Sobrino, J. A. (2013) · Remote Sensing of Environment · doi:10.1016/j.rse.2012.12.008 · Cited by 2,274
Self-citationNew refinements and validation of the collection-6 MODIS land-surface temperature/emissivity product
Wan, Z. (2014) · Remote Sensing of Environment · doi:10.1016/j.rse.2013.08.027 · Cited by 1,075
Land Surface Emissivity Retrieval From Different VNIR and TIR Sensors
Sobrino, J. A., Jimenez-Munoz, J. C., Soria, G., Romaguera, M., Guanter, L., Moreno, J., Plaza, A., & Martinez, P. (2008) · IEEE Transactions on Geoscience and Remote Sensing · doi:10.1109/tgrs.2007.904834 · Cited by 762
Self-citationLand surface emissivity retrieval from satellite data
Li, Z.-L., Wu, H., Wang, N., Qiu, S., Sobrino, J. A., Wan, Z., Tang, B.-H., & Yan, G. (2013) · International Journal of Remote Sensing · doi:10.1080/01431161.2012.716540 · Cited by 496
Self-citationGeneration of real‐time mode high‐resolution water vapor fields from GPS observations
Yu, C., Penna, N. T., & Li, Z. (2017) · Journal of Geophysical Research: Atmospheres · doi:10.1002/2016jd025753 · Cited by 368
Self-citation
Metadata
- Authors
- Sobrino, J. A., El Kharraz, J., & Li, Z.-L.
- Venue
- International Journal of Remote Sensing
- Publisher
- Informa UK Limited
- Published
- 2003-01
- Volume
- 24
- Issue
- 24
- Pages
- 5161-5182
- ISSN
- 0143-1161 (ISSN-L)
- 1366-5901
- OpenAlex
- W2082764596
- Cited by
- 219
- References
- 0
- FWCI
- 5.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Surface temperature and water vapour retrieval from MODIS data. https://app.cochat.ai/papers/10.1080/0143116031000102502
- The paper
- Sobrino, J. A., El Kharraz, J., & Li, Z.-L. (2003). Surface temperature and water vapour retrieval from MODIS data. International Journal of Remote Sensing. https://doi.org/10.1080/0143116031000102502
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.