Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 43 of the 44 references it cites were found in a registry or an index; none of the 38 sources its claims cite is checked for support yet.

Comparing 2D capabilities of HEC-RAS and LISFLOOD-FP on complex topography

Open access

Abstract

This study evaluates and compares two-dimensional (2D) numerical models of different complexities by testing them on a floodplain inundation event that occurred on the Secchia River (Italy). We test 2D capabilities of LISFLOOD-FP and HEC-RAS (5.0.3), implemented using various grid sizes (25–100 m) based on 1-m DEM resolution. As expected, the best results were shown by the higher-resolution grids (25 m) for both models, which is justified by the complex terrain of the area. However, the coarser resolution simulations (50 and 100 m) performed virtually identically compared to the high-resolution simulations. Nevertheless, the spatial distribution of flood characteristics varies: the 50 and 100 m results of LISFLOOD-FP and HEC-RAS misestimated flood extent and water depth in selected control areas (built-up zones). We suggest that the specific terrain of the area can cause ambiguities in large-scale modelling, while providing plausible results in terms of the overall model performance.

Overview

CoChat Summary

TL;DR

This study compares 2D HEC-RAS 5.0.3 and LISFLOOD-FP on the January 2014 Secchia River levee-breach flood using 25–100 m grids derived from a 1-m LiDAR DEM. LISFLOOD-FP at 25 m gave the best overall extent and depth accuracy, while HEC-RAS with 1-m sub-grid terrain performed well at coarser meshes but was much slower.

Key findings

  • LISFLOOD-FP at 25 m (L25) had the best overall performance: F = 81% for inundation extent and RMSE = 0.61 m at 46 watermarks; HEC-RAS 50 m with 1-m sub-grid (HEC50_1) had RMSE = 0.62 m.
  • HEC-RAS with 1-m sub-grid terrain produced RMSE ≈ 0.71 m, better than HEC-RAS coarse sub-grids and LISFLOOD-FP 50/100 m (0.79–0.84 m), except L25 was comparable.
  • LISFLOOD-FP was about 20 times faster than HEC-RAS for the same grids and time step (e.g. L50 took 1 min 20 s vs HR50_1 25 min); HR100_1 was identified as the best HEC-RAS choice with 78% extent accuracy and 0.71 m RMSE.
  • Spatial patterns differed: 50- and 100-m LISFLOOD-FP and HEC-RAS misestimated flood extent and water depth in built-up control areas (Bomporto and Bastiglia), and HEC-RAS sub-grid configurations produced dry islands/disconnected flooded areas.

Methods

  • Case study: the 19 January 2014 Secchia River (Italy) levee-breach flood, which inundated over 50 km² within 48 h, with a breach width of nearly 100 m and an estimated inflow volume of 38.7 × 10⁶ m³; simulations were fully 2D with no 1D channel flow.
  • Models: HEC-RAS 5.0.3 (2D diffusion wave, structured mesh, optional 1-m sub-grid terrain) and LISFLOOD-FP (raster-based inertial shallow-water formulation, mesh forced by DEM resolution); nine configurations used 25-, 50- and 100-m DEM/mesh sizes, plus HEC-RAS 1-m sub-grid with 25-, 50- and 100-m meshes.
  • Calibration and validation: Manning’s n for rural areas varied from 0.03 to 0.2 in 0.005 increments with urban n fixed at 0.3; calibrated at 25 m against a reference extent from Carisi et al. (2018) using F, validated against 46 watermarks using RMSE, with computations on a four-core Intel Core i7 3.60 GHz CPU and 64 GB RAM.

Limitations

  • The paper states that HEC-RAS sub-grid terrain cannot recognize the exact location of higher/lower ground within a cell, causing a leakage effect and hydraulically disconnected flooded areas; LISFLOOD-FP distributes water equally across each raster cell and may misestimate extent at coarse resolutions (≥100 m).
  • The paper states that LiDAR vertical accuracy is ±0.15 m and observed watermarks have an accuracy range up to ±0.5 m; calibration roughness values were chosen to compensate for possible errors and do not reflect actual vegetation/soil cover, and no channel flow was included.
  • Evident from the text: the study is based on a single flood event and structured meshes only, intentionally avoided “burning” linear terrain features into coarser terrain, and focused on two built-up control areas, so generalization to other catchments or unstructured-mesh applications is not demonstrated.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1080/02626667.2019.1671982

Cites

43 of 43 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Verification

Claims the paper makes

0 Valid · 1 Not valid · 28 Not checked · 95 Own results and interpretations

55 more claims

Create a free account to see all 124 claims and every source verdict.

See all claims — free account
  • It may state two separate claims as one. 40
  • The quote only partly states this claim. 1
  • Probably not a substantial claim. 34

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

1 of 1

Citations

Cites

Show all 44 references

Research works printed but not linked: 5

  1. Castellarin, A., Ceola, S., Toth, E., and Montanari, A. 2014. Evolving water resources systems. In: A. Castellarin, et al., ed. Understanding, predicting and managing water–society interactions. Wallingford, UK: International Association of Hydrological Sciences (IAHS), IAHS Publication, 144–7815, 364.
  2. EC 2007. Directive 2007/60/EC of the European Parliament and of the Directive 2007/60/EC of the European Parliament and of the Council of 23 October 2007 on the assessment and management of flood risks Flood Directive revised European Parliament and Council. In: Official Journal L 288.
  3. EEA, 2007. CLC2006 technical guidelines. Luxembourg: Publications Office, (Technical report (European Environment Agency.Online), 17/2007).
  4. Munich Re, 2015. NatCatSERVICE loss events worldwide 1980–2014. Munich, Germany: Munich Reinsurance, 10.
  5. Syme, W.J., 2008. 9th National Conference on hydraulics in water engineering. Hydraulics 2008. Barton, ACT: Engineers Australia.

Cited by

See all 228

Metadata

Authors
Shustikova, I., Domeneghetti, A., Neal, J. C., Bates, P., & Castellarin, A.
Affiliations
  • University of Bologna (IT)
  • University of Bristol (GB)
Corresponding author
Shustikova, Iuliia
Venue
Hydrological Sciences Journal
Published
2019-10-16
Volume
64
Issue
14
Pages
1769-1782
ISSN
  • 0262-6667 (ISSN-L)
  • 2150-3435
OpenAlex
W2962947570
Cited by
228
References
44
Citations by year
2026: 36 · 2025: 33 · 2024: 40 · 2023: 45 · 2022: 34 · 2021: 26 · 2020: 12 · 2019: 1
FWCI
6.69
Type
journal article
Language
en
Open access
Locations
  • Hydrological Sciences Journal (publishedVersion, cc-by-nc-nd)
  • Bristol Research (University of Bristol) (publishedVersion, other-oa)
  • Archivio istituzionale della ricerca (Alma Mater Studiorum Università di Bologna) (submittedVersion, cc-by-nc-nd)
Funders
European Union’s Horizon 2020 research and innovation program (676027)
Topics
  • Physical Sciences › Environmental Science › Global and Planetary Change › Flood Risk Assessment and Management
  • Physical Sciences › Environmental Science › Water Science and Technology › Hydrology and Watershed Management Studies
  • Physical Sciences › Earth and Planetary Sciences › Earth-Surface Processes › Hydrology and Sediment Transport Processes
Keywords
HEC-RAS, LISFLOOD-FP, model comparison, complex terrain, grid resolution, floodplain inundation, water depth, flood inundation area, built-up areas, DEM resolution

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

A language model drew the claims from the paper on 2026-11-19, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-11-19 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Comparing 2D capabilities of HEC-RAS and LISFLOOD-FP on complex topography. https://app.cochat.ai/papers/10.1080/02626667.2019.1671982
The paper
Shustikova, I., Domeneghetti, A., Neal, J. C., Bates, P., & Castellarin, A. (2019). Comparing 2D capabilities of HEC-RAS and LISFLOOD-FP on complex topography. Hydrological Sciences Journal. https://doi.org/10.1080/02626667.2019.1671982

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.