CoChat
Sign Up
Cited by 17Metal Forming Simulation TechniquesAdvanced Welding Techniques AnalysisMicrostructure and mechanical properties

The DOI matches its Crossref record.

Investigation on formability of three-layer joined Al/Cu/Al sheets annealed at different temperature

Roostaei, Milad, Darabi, Roya·2020·Materials Science and Technology
DOI 10.1080/02670836.2020.1792637
Open this paper in CoChat — free account

Abstract

Today, the use of multi-layer sheets has expanded widely in various industries. The determination of the forming limit curve for sheets is essential. In this project, three-layer aluminium1100-copper10100-aluminium1100 sheet was produced using an explosive welding method and cold rolling up to 85% strain. Then to eliminate the rolling microstructure and create the isotropic properties and to investigate the effect of annealing temperature on formability, three-layer sheets were annealed at 350°C, 400°C, and 450°C for one hour. Afterward, the numerical and experimental forming limits for these sheets are obtained at room temperature. ABAQUS finite element software and Freudenthal, Cockcroft, and Brozzo ductile fracture criteria were used in numerical method, and punch stretching test was used in the experimental method.

Overview

Integrity signals

Registry

Crossref · 10.1080/02670836.2020.1792637

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

No references could be resolved yet.

Research works printed but not linked: 39

  1. 10.1007/s12540-016-5687-4 · DOI
  2. 10.1016/j.matdes.2011.12.045 · DOI
  3. Rahmatabadi D, 2017, J Sci Technol Compos, 4, 311
  4. Karajibani E, 2016, J Sci Technol Compos, 2, 45
  5. Backhofen SPK., 1963, ASM Trans Q, 56, 25
  6. 10.1016/j.jmatprotec.2009.04.020 · DOI
  7. 10.1016/S0924-0136(03)00587-9 · DOI
  8. 10.1016/j.jmatprotec.2004.01.014 · DOI
  9. 10.4236/msa.2011.25067 · DOI
  10. 10.1016/j.ijmachtools.2013.10.001 · DOI
  11. 10.1007/BF02686411 · DOI
  12. 10.1016/S0749-6419(99)00043-1 · DOI
  13. 10.1016/S0924-0136(96)02601-5 · DOI
  14. 10.1243/09544054JEM1140 · DOI
  15. 10.1016/j.jmapro.2017.07.022 · DOI
  16. 10.1007/s12666-016-0986-5 · DOI
  17. 10.1016/j.ijmecsci.2006.01.021 · DOI
  18. 10.22060/mej.2016.775 · DOI
  19. Shahbazi-karami J., 2017, J Sci Technol Compos, 4, 205
  20. Karami JS, 2017, J Sc Technol Compos, 4, 275
  21. Karami JS, 2017, J Sci Technol Compos, 7, 661
  22. 10.1007/s00170-016-9585-1 · DOI
  23. 10.1007/s00170-009-2446-4 · DOI
  24. 10.1007/s11665-015-1435-z · DOI
  25. 10.1115/1.4034717 · DOI
  26. 10.1088/2053-1591/ab51c8 · DOI
  27. 10.1115/1.4040542 · DOI
  28. 10.1007/s11106-018-9962-4 · DOI
  29. 10.1016/j.promfg.2020.04.199 · DOI
  30. 10.1016/j.matdes.2012.05.027 · DOI
  31. 10.1016/j.matdes.2018.10.043 · DOI
  32. 10.1007/s11663-016-0682-1 · DOI
  33. Wiley MFJ, York N. (1950). Reviews the inelastic behavior of engineering materials and structures. 1950.
  34. Cockcroft MG, 1968, J Inst Met, 96, 33
  35. Brozzo P, Deluca BRR. (1972). A new method for the prediction of formability in metal sheets. Proceedings of the Seventh Biennial Conference of IDDRG on Sheet Metal Forming and Formability.
  36. 10.1017/S0305004100055596 · DOI
  37. Azodi HD, 2017, Iran J Mater Form, 4, 39
  38. 10.1016/j.acme.2013.10.009 · DOI
  39. 10.1007/BF00662549 · DOI

Cited by

Sorted by citations

Metadata

Authors
Roostaei, M., & Darabi, R.
Affiliations
  • University of Tehran (IR)
  • Universidade do Porto (PT)
Corresponding author
Darabi, Roya
ORCID
Venue
Materials Science and Technology
Publisher
SAGE Publications
Published
2020-09
Volume
36
Issue
13
Pages
1476-1486
ISSN
  • 0267-0836 (ISSN-L)
  • 1743-2847
DOI
10.1080/02670836.2020.1792637
OpenAlex
W3043189691
Cited by
17
References
0
Citations by year
2026: 2 · 2025: 4 · 2024: 4 · 2023: 1 · 2022: 4 · 2021: 2
FWCI
0.86
Type
journal article
Language
en
Open access
closed
Licence
journals.sagepub.com/page/policies/text-and-data-mining-license (tdm)
Locations
Materials Science and Technology (publishedVersion)
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Metal Forming Simulation Techniques
  • Physical Sciences › Engineering › Mechanical Engineering › Advanced Welding Techniques Analysis
  • Physical Sciences › Materials Science › Metals and Alloys › Microstructure and mechanical properties
Keywords
formability, explosive welding, annealing temperature, forming limit diagram, ductile fracture criterion, cold rolling

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review