The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Studies on Jute Composites—A Literature Review
Abstract
Jute fiber is an important agricultural product. It is one of the most common natural fibers in Third World countries such as India, China, Bangladesh, etc. The jute industry has special importance in the economy of India and continues to be a major traditional earner of foreign exchange. However, it is facing tough competition from the synthetic fibers. Jute fibers find use in sophisticated fields like decorative and furnishing materials such as lamp shades, wall covers, curtains, upholsteries, etc. Today it is the least expensive fiber of mass consumption, at only a fraction of the cost of glass fibers; in terms of volume, jute is now the second most important fiber in the world, next to cotton. In the traditional applications in carpets, ropes, sacks, etc., jute fibers have been partially replaced by synthetic fibers which have some advantages compared to jute. In order to ensure a reasonable return to farmers, nontraditional outlets have to be explored for the fiber. One such avenue is in the area of fiber-reinforced composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
American society for testing and materials
Mather, B., & Etris, S. F. (2006) · Encyclopedia of Earth Science · doi:10.1007/0-387-30720-6_5 · Cited by 5,558
Mechanics of Composite Materials
Jones, R. M., & Bert, C. W. (1975) · Journal of Applied Mechanics · doi:10.1115/1.3423688 · Cited by 3,205
Plueddemann, E. P. (1982) · Springer eBooks · doi:10.1007/978-1-4899-0342-6 · Cited by 2,719
Moisture Absorption and Desorption of Composite Materials
Shen, C.-H., & Springer, G. S. (1976) · Journal of Composite Materials · doi:10.1177/002199837601000101 · Cited by 1,336
Lignin biodegradation and transformation
Crawford, R. L. (1981) · Medical Entomology and Zoology · Cited by 524
Handbook of fillers and reinforcements for plastics
Katz, H. S., & Milewski, J. V. (1978) · Cited by 511
Wood fibers as reinforcing fillers for polyolefins
Woodhams, R. T., Thomas, G., & Rodgers, D. K. (1984) · Polymer Engineering & Science · doi:10.1002/pen.760241504 · Cited by 391
Dalväg, H., Klason, C., & Strömvall, H.-E. (1985) · International Journal of Polymeric Materials and Polymeric Biomaterials · doi:10.1080/00914038508078651 · Cited by 303
Jute-reinforced polyester composites
Roe, P. J., & Ansell, M. P. (1985) · Journal of Materials Science · doi:10.1007/bf00552393 · Cited by 291
Maldas, D., Kokta, B. V., & Daneault, C. (1989) · Journal of Applied Polymer Science · doi:10.1002/app.1989.070370313 · Cited by 286
Cited by
Natural fiber polymer composites: A review
Saheb, D. N., & Jog, J. P. (1999) · Advances in Polymer Technology · doi:10.1002/(sici)1098-2329(199924)18:4<351::aid-adv6>3.0.co;2-x · Cited by 2,429
George, J., Sreekala, M. S., & Thomas, S. (2001) · Polymer Engineering & Science · doi:10.1002/pen.10846 · Cited by 1,247
Surface modifications of natural fibers and performance of the resulting biocomposites: An overview
Mohanty, A. K., Misra, M., & Drzal, L. T. (2001) · Composite Interfaces · doi:10.1163/156855401753255422 · Cited by 1,072
Self-citationGholampour, A., & Ozbakkaloglu, T. (2020) · Journal of Materials Science · doi:10.1007/s10853-019-03990-y · Cited by 1,058
Natural Fibers, Biopolymers, and Biocomposites: An Introduction
Mohanty, A., Misra, M., Drzal, L., Selke, S., Harte, B., & Hinrichsen, G. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch1 · Cited by 976
Self-citation
Metadata
- Authors
- Mohanty, A. K., & Misra, M.
- Venue
- Polymer-Plastics Technology and Engineering
- Publisher
- Informa UK Limited
- Published
- 1995-09
- Volume
- 34
- Issue
- 5
- Pages
- 729-792
- ISSN
- 0360-2559 (ISSN-L)
- 1525-6111
- OpenAlex
- W1984845333
- Cited by
- 264
- References
- 42
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Studies on Jute Composites—A Literature Review. https://app.cochat.ai/papers/10.1080/03602559508009599
- The paper
- Mohanty, A. K., & Misra, M. (1995). Studies on Jute Composites—A Literature Review. Polymer-Plastics Technology and Engineering. https://doi.org/10.1080/03602559508009599
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.