The DOI matches its Crossref record.
Optimal offline compensation of shape shrinkage for three-dimensional printing processes
Abstract
Dimensional accuracy is a key control issue in direct three-dimensional (3D) printing. Part shrinkage due to material phase changes often leads to deviations in the final shape, requiring extra post-machining steps for correction. Shrinkage has traditionally been analyzed through finite element simulation and experimental investigations. Systematic models for accuracy control through shrinkage compensation are rarely available, particularly for complete control of all local features. To fill the gap for direct printing and compensate for shape shrinkage, this article develops a new approach to (i) model and predict part shrinkage and (ii) derive an optimal shrinkage compensation plan to achieve dimensional accuracy. The developed approach is demonstrated both analytically and experimentally in a stereolithography process, one of the most widely employed 3D printing techniques. Experimental results demonstrate the ability of the proposed compensation approach to achieve an improvement of an order of magnitude in the reduction of geometric errors for cylindrical products.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
In-plane shape-deviation modeling and compensation for fused deposition modeling processes
Wang, A., Song, S., Huang, Q., & Tsung, F. (2017) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2016.2544941 · Cited by 79
Self-citation
Metadata
- Authors
- Huang, Q., Zhang, J., Sabbaghi, A., & Dasgupta, T.
- Venue
- IIE Transactions
- Publisher
- Informa UK Limited
- Published
- 2014-10-28
- Volume
- 47
- Issue
- 5
- Pages
- 431-441
- ISSN
- 0740-817X (ISSN-L)
- 1545-8830
- OpenAlex
- W2072719868
- Cited by
- 184
- References
- 0
- FWCI
- 15.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Optimal offline compensation of shape shrinkage for three-dimensional printing processes. https://app.cochat.ai/papers/10.1080/0740817x.2014.955599
- The paper
- Huang, Q., Zhang, J., Sabbaghi, A., & Dasgupta, T. (2015). Optimal offline compensation of shape shrinkage for three-dimensional printing processes. IIE Transactions. https://doi.org/10.1080/0740817x.2014.955599
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.