On the meaning of ‘Waste’: review and definition
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Waste reduction is one of the main principles of lean, but it has been taken for granted that we have a common understanding of what waste means. We first present a critical, qualitative discussion that identifies four distinct waste concepts. We then conduct a systematic review of the literature that examines the different uses of these concepts. We find that only the classic concept of the seven wastes and the concept of waste as non-value-adding activity are widely applied. However, both concepts are, at times, not only incompatible but used in a way that leads to open contradiction. A new definition, centred on an efficient, timely transformation process seeks to consolidate the literature. We outline two distinct waste types: (i) obvious waste, to refer to any waste that can be reduced without creating another form of waste; and, (ii) buffer waste, to refer to any waste that cannot be reduced without creating another waste. The paper has important implications for practice. To reduce waste, managers must undertake three interlinked tasks: the elimination of obvious waste; the reduction of variability to transform buffers into obvious waste; and, the balancing of remaining buffers to best achieve performance targets. The paper supports managers in their endeavours to identify waste, which is an important precursor to waste reduction/elimination.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lean manufacturing: context, practice bundles, and performance
Shah, R., & Ward, P. T. (2003) · Journal of Operations Management · doi:10.1016/s0272-6963(02)00108-0 · Cited by 2,897 · cited 8×
“It integrates the obvious waste and buffer concepts put forward by Hopp and Spearman (2004) and by Shah and Ward (2007) into our waste definition, but in a form that clarifies its relationship with the pre-existing waste concepts of the seven (or eight) wastes and waste as nonvalue-adding activity. We argue that the d…”
BackgroundInfluentialLean Thinking—Banish Waste and Create Wealth in your Corporation
Womack, J. P., & Jones, D. T. (1997) · Journal of the Operational Research Society · doi:10.1057/palgrave.jors.2600967 · Cited by 2,122
A Study of the Toyota Production System From an Industrial Engineering Viewpoint
Shingo, S., & Bodek, N. (2019) · doi:10.4324/9781315136509 · Cited by 1,064
Lean manufacturing: literature review and research issues
Bhamu, J., & Singh Sangwan, K. (2014) · International Journal of Operations & Production Management · doi:10.1108/ijopm-08-2012-0315 · Cited by 983 · cited 2×
“…on the lean paradigm (e.g. Hines, Holweg, and Rich 2004; Papadopoulou and Özbayrak 2005; Holweg 2007; Shah and Ward 2007; MoyanoFuentes and Sacristán-Díaz 2012; Bhamu and Sangwan 2014; Jasti and Kodali 2015), to the best of our knowledge, a review specifically on waste has not been presented.”
Backgroundde Treville, S., & Antonakis, J. (2006) · Journal of Operations Management · doi:10.1016/j.jom.2005.04.001 · Cited by 549 · cited 2×
“A third subdivision of waste was suggested by Narasimhan et al. (2006, 441, 442) who stated that: ‘Recent studies (Hopp and Spearman 2004; de Treville and Antonakis 2006) identify modes of waste reduction including “obvious wastes” such as unneeded processes, excessive setup times, unreliable…”
Background
Cited by
Antony, J., Psomas, E., Garza-Reyes, J. A., & Hines, P. (2021) · Production Planning & Control · doi:10.1080/09537287.2020.1776410 · Cited by 116
Research gaps in Lean manufacturing: a systematic literature review
Psomas, E., & Antony, J. (2019) · International Journal of Quality & Reliability Management · doi:10.1108/ijqrm-12-2017-0260 · Cited by 93
Is lean a theory? Viewpoints and outlook
Åhlström, P., Danese, P., Hines, P., Netland, T. H., Powell, D., Shah, R., Thürer, M., & van Dun, D. H. (2021) · International Journal of Operations & Production Management · doi:10.1108/ijopm-06-2021-0408 · Cited by 74
Self-citation
Metadata
- Authors
- Thürer, M., Tomašević, I., & Stevenson, M.
- Venue
- Production Planning & Control
- Publisher
- Informa UK Limited
- Published
- 2016-11-28
- Volume
- 28
- Issue
- 3
- Pages
- 244-255
- ISSN
- 0953-7287 (ISSN-L)
- 1366-5871
- OpenAlex
- W2557377197
- Cited by
- 71
- References
- 5
- FWCI
- 8.31
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: On the meaning of ‘Waste’: review and definition. https://app.cochat.ai/papers/10.1080/09537287.2016.1264640
- The paper
- Thürer, M., Tomašević, I., & Stevenson, M. (2017). On the meaning of ‘Waste’: review and definition. Production Planning & Control. https://doi.org/10.1080/09537287.2016.1264640
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.