The effect of alkali on the product distribution from black liquor conversion under supercritical water
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Lignin in chemical pulping waste, or black liquor (BL), can be converted into various products via supercritical water gasification (SCWG). However, the inherited alkaline contents from the pulping chemicals may affect the product yields and properties. In this research, the influence of the residual alkali on the product distribution via SCWG of soda BL and kraft BL was evaluated. The SCWG was performed in a batch quartz reactor for 10 min at various temperatures (673, 773 and 873 K) and pressures (250, 300 and 400 bar). The highest hydrogen (H2) production occurred at 873 K for the soda BL. The water–gas shift reaction with sodium ions played an important part in the H2 production, while only small amounts of methane and carbon monoxide were detected. Hydrocarbons, carboxylic acids and esters were the dominant substrates in the liquid products, which denoted the potential of this method for bond cleaving of the lignin macromolecule. As a result, BL, which typically contains alkali salt, was an appropriate feedstock for the SCWG reaction to produce renewable fuel. This method not only has a positive influence on the generation of value added products from highly corrosive waste but also helps avoid some technical problems commonly encountered with direct firing in a recovery boiler.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sınaǧ, A., Kruse, A., & Rathert, J. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030475+ · Cited by 327
Cardoso, M., de Oliveira, É. D., & Passos, M. L. (2009) · Fuel · doi:10.1016/j.fuel.2008.10.016 · Cited by 189 · cited 1×
“In addition, BL contains residual inorganic chemicals, and mainly comprises numerous organic extractives that originated from the wood [1].”
BackgroundCatalytic effects of NaOH and Na2CO3 additives on alkali lignin pyrolysis and gasification
Guo, D.-L., Wu, S.-B., Liu, B., Yin, X.-L., & Yang, Q. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.01.042 · Cited by 155
Cited by
Hydrothermal liquefaction and gasification of biomass and model compounds: a review
Yang, C., Wang, S., Yang, J., Xu, D., Li, Y., Li, J., & Zhang, Y. (2020) · Green Chemistry · doi:10.1039/d0gc02802a · Cited by 167
Magdeldin, M., & Järvinen, M. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114558 · Cited by 71
Özdenkçi, K., Prestipino, M., Björklund-Sänkiaho, M., Galvagno, A., & De Blasio, C. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110146 · Cited by 43
Fedyaeva, O. N., Vostrikov, A. A., Shishkin, A. V., & Dubov, D. Y. (2019) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2018.08.015 · Cited by 26
Metadata
- Authors
- Hawangchu, Y., Atong, D., & Sricharoenchaikul, V.
- Venue
- Environmental Technology
- Publisher
- Informa UK Limited
- Published
- 2017-05-11
- Volume
- 38
- Issue
- 13-14
- Pages
- 1742-1750
- ISSN
- 0959-3330 (ISSN-L)
- 1479-487X
- OpenAlex
- W2608034444
- Cited by
- 21
- References
- 3
- FWCI
- 1.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The effect of alkali on the product distribution from black liquor conversion under supercritical water. https://app.cochat.ai/papers/10.1080/09593330.2017.1323954
- The paper
- Hawangchu, Y., Atong, D., & Sricharoenchaikul, V. (2017). The effect of alkali on the product distribution from black liquor conversion under supercritical water. Environmental Technology. https://doi.org/10.1080/09593330.2017.1323954
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.