Solidification of stainless steel slag by accelerated carbonation
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
On exposure to carbon dioxide (CO2) at a pressure of 3 bars, compacts formed from pressed ground slag, and 12.5 weight percent water, were found to react with approximately 18% of their own weight of CO2. The reaction product formed was calcium carbonate causing the slag to self-cement. Unconfined compressive strengths of 9MPa were recorded in carbonated compacts whereas strengths of < 1 MPa were recorded in non-carbonated slag compacts. As molten stainless steel slag containing dicalcium silicate (C2S) cools it can undergo several phase transitions. The final transformation from the beta-polymorph to gamma-C2S is accompanied by a volume change that causes the slag to self-pulverise or 'dust'. As a consequence of this the fine grained portion of the slag contains more of this phase whilst the coarser particles of the slag contain more of the calcium magnesium silicates that contribute the bulk of the waste. The fine fraction (< 125 microm) of the slag when ground is found to react to the same extent as the ground bulk slag and produces compacts with equivalent strength. A coarser fraction (4-8 mm) when ground to a similar grading does not react as extensively and produces a weaker product. Additions of ordinary Portland cement (OPC) at 5 and 10 percent by weight did not alter the degree of reaction during carbonation of the bulk slag or ground fine fraction, however the strength of the 4-8 mm fraction was increased by this change.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Calcium silicate carbonation products
Goto, S., Suenaga, K., Kado, T., & Fukuhara, M. (1995) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1995.tb09057.x · Cited by 217
Cited by
FERNANDEZBERTOS, M., SIMONS, S., HILLS, C., & CAREY, P. (2004) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2004.04.019 · Cited by 1,079
Self-citationMineral CO 2 Sequestration by Steel Slag Carbonation
Huijgen, W. J. J., Witkamp, G.-J., & Comans, R. N. J. (2005) · Environmental Science & Technology · doi:10.1021/es050795f · Cited by 858
Review on carbonation curing of cement-based materials
Zhang, D., Ghouleh, Z., & Shao, Y. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.07.003 · Cited by 809
Jang, J. G., Kim, G. M., Kim, H. J., & Lee, H. K. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.10.017 · Cited by 419
Effect of carbonation curing regime on strength and microstructure of Portland cement paste
Chen, T., & Gao, X. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.05.034 · Cited by 385
Metadata
- Authors
- Johnson, D. C., Macleod, C. L., Carey, P. J., & Hills, C. D.
- Venue
- Environmental Technology
- Publisher
- Informa UK Limited
- Published
- 2003-06
- Volume
- 24
- Issue
- 6
- Pages
- 671-678
- ISSN
- 0959-3330 (ISSN-L)
- 1479-487X
- OpenAlex
- W2073394532
- Cited by
- 98
- References
- 1
- FWCI
- 11.23
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Solidification of stainless steel slag by accelerated carbonation. https://app.cochat.ai/papers/10.1080/09593330309385602
- The paper
- Johnson, D. C., Macleod, C. L., Carey, P. J., & Hills, C. D. (2003). Solidification of stainless steel slag by accelerated carbonation. Environmental Technology. https://doi.org/10.1080/09593330309385602
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.