The DOI matches its Crossref record.
An Anisotropic Model for Annulus Tissue and Enhanced Finite Element Analyses of Intact Lumbar Disc Bodies
Abstract
The current investigation addresses advanced FE analyses of intact lumbar intervertebral discs. Human disc body units basically consist of a fluid filled cavity (nucleus pulposus) approximately at the disc center and surrounding annulus tissue reinforced by collagen fibers (annulus fibrosus). For the latter component a constitutive model is presented which accounts for nonlinear anisotropic stress response. In contrast to state-of-the-art material descriptions mostly used in the literature (linear elasticity), the current approach provides numerical accuracy in the finite strain regime. Thus, local strain and stress distributions in the annulus fibrosus can properly be determined. Because of the highly nonlinear stress response of the constitutive equations, nonlinear material parameters are required. Although tensile properties of the human annulus fibrosus can already be found in the literature, these material data are not suitable for the current concept as will be shown. The entire constitutive theory is therefore based on a new experimental procedure for the determination of local, nonlinear and anisotropic stress response in annulus tissue. The constitutive model proves its applicability in representative numerical examples. In contrast to state-of-the-art FE analyses, the results do not exhibit parasitic strain (and stress) distributions in annulus tissue under physiological loading conditions. Hence, the current approach seems to be very attractive for refined spinal implant design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Constitutive modelling of arteries
Holzapfel, G. A., & Ogden, R. W. (2010) · Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.2010.0058 · Cited by 528
Self-citationSingle lamellar mechanics of the human lumbar anulus fibrosus
Holzapfel, G. A., Schulze-Bauer, C. A. J., Feigl, G., & Regitnig, P. (2005) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-004-0053-8 · Cited by 467
Self-citationSchmidt, H., Kettler, A., Heuer, F., Simon, U., Claes, L., & Wilke, H.-J. (2007) · Spine · doi:10.1097/01.brs.0000259059.90430.c2 · Cited by 276
Mechanical design criteria for intervertebral disc tissue engineering
Nerurkar, N. L., Elliott, D. M., & Mauck, R. L. (2010) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2009.12.001 · Cited by 252
Metadata
- Authors
- EBERLEIN∗, R., HOLZAPFEL†, G. A., & SCHULZE-BAUER‡, C. A. J.
- Venue
- Computer Methods in Biomechanics and Biomedical Engineering
- Publisher
- Informa UK Limited
- Published
- 2001-01
- Volume
- 4
- Issue
- 3
- Pages
- 209-229
- ISSN
- 1025-5842 (ISSN-L)
- 1476-8259
- OpenAlex
- W2134826917
- Cited by
- 202
- References
- 0
- FWCI
- 2.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An Anisotropic Model for Annulus Tissue and Enhanced Finite Element Analyses of Intact Lumbar Disc Bodies. https://app.cochat.ai/papers/10.1080/10255840108908005
- The paper
- EBERLEIN∗, R., HOLZAPFEL†, G. A., & SCHULZE-BAUER‡, C. A. J. (2001). An Anisotropic Model for Annulus Tissue and Enhanced Finite Element Analyses of Intact Lumbar Disc Bodies. Computer Methods in Biomechanics and Biomedical Engineering. https://doi.org/10.1080/10255840108908005
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.