Viscoelastic Effects in MIL-L-7808-Type Lubricant, Part I: Analytical Formulation
The DOI matches its Crossref record.
Abstract
Analytical formulations for the computation of lubricant film thickness and traction in a high-speed rolling-sliding contact are presented with the objective of investigating the viscoelastic response of the MIL-L-7808-type lubricant Two types of relations are used to model the viscous shear strain rate. In the Type I model, a hyperbolic sine relation is used to model the viscous effect which becomes significant when the shear stress reaches a critical value. The Type II model employs a limiting shear stress, which the lubricant can withstand, and an inverse hyperbolic tangent function is considered to model the viscous behavior. Both models are based on three fundamental properties: lubricant viscosity, shear modulus and a critical shear stress. While the viscosity relations may be obtained by direct measurements, estimates of shear modulus and critical shear stress may be derived by curve-fitting the model predictions to experimental traction data.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A Review of Elasto-Hydrodynamic Lubrication Theory
Lugt, P. M., & Morales-Espejel, G. E. (2011) · Tribology Transactions · doi:10.1080/10402004.2010.551804 · Cited by 260
Li, S., & Kahraman, A. (2010) · Tribology Transactions · doi:10.1080/10402000903502279 · Cited by 149
Prediction of mechanical gear mesh efficiency of hypoid gear pairs
Kolivand, M., Li, S., & Kahraman, A. (2010) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2010.06.015 · Cited by 117
Marian, M., Bartz, M., Wartzack, S., & Rosenkranz, A. (2020) · Lubricants · doi:10.3390/lubricants8100095 · Cited by 92
“adapted for specific lubricants [54] or modified for a combination with non-Newtonian fluid behavior [55].”
BackgroundA Method to Derive Friction and Rolling Power Loss Formulae for Mixed Elastohydrodynamic Lubrication
LI, S., & KAHRAMAN, A. (2011) · Journal of Advanced Mechanical Design, Systems, and Manufacturing · doi:10.1299/jamdsm.5.252 · Cited by 45
Metadata
- Authors
- Gupta, P. K., Cheng, H. S., Zhu, D., Forster, N. H., & Schrand, J. B.
- Venue
- Tribology Transactions
- Publisher
- Informa UK Limited
- Published
- 1992-01
- Volume
- 35
- Issue
- 2
- Pages
- 269-274
- ISSN
- 1040-2004 (ISSN-L)
- 1547-397X
- OpenAlex
- W1967755688
- Cited by
- 142
- References
- 0
- FWCI
- 7.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Viscoelastic Effects in MIL-L-7808-Type Lubricant, Part I: Analytical Formulation. https://app.cochat.ai/papers/10.1080/10402009208982117
- The paper
- Gupta, P. K., Cheng, H. S., Zhu, D., Forster, N. H., & Schrand, J. B. (1992). Viscoelastic Effects in MIL-L-7808-Type Lubricant, Part I: Analytical Formulation. Tribology Transactions. https://doi.org/10.1080/10402009208982117
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.