The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Influence of Nb and Y on Hot Corrosion Behavior of Ni–Cr-based Superalloys
Abstract
The hot corrosion behaviors of new-type Ni–Cr-based superalloys were investigated at elevated temperature. The effect of Nb or/and Y on hot corrosion resistance was investigated by corrosion kinetics. Surface morphology of the corrosion products was observed by SEM and the phase constituents were analyzed by XRD. Results showed that the corrosion scales of the Ni–Cr-based alloys consisted of Cr2O3, Al2O3, TiO2, and NiCr2O4. NiO was only detected in the alloy without Nb and Y. With the addition of Nb or/and Y, the hot corrosion resistance of the alloy was notably improved. The action mechanisms of Nb and Y were discussed in this study.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The adoption of Nb (4 wt%) or Y (0.4 wt%) mitigates the hot corrosion of Ni-Cr based alloys due to the formation of dense Cr2O3 with smaller particle size.”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [108]
In the citing paper
“Moreover, the performance of Ni-Cr based alloys with 0.4 wt% Y addition is superior to than with 4 wt% Na addition [108].”
From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [108]
Citations
Cites
Han, F. F., Chang, J. X., Li, H., Lou, L. H., & Zhang, J. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2014.08.259 · Cited by 69
The mechanism of the low-temperature hot corrosion of pure iron and manganese at 600–800°C
Gesmundo, F., & Viani, F. (1988) · Materials Chemistry and Physics · doi:10.1016/0254-0584(88)90085-5 · Cited by 9
Research works printed but not linked: 40
- 10.1016/j.corsci.2013.11.048 · DOI
- 10.1016/j.corsci.2013.01.004 · DOI
- 10.1016/j.corsci.2014.01.020 · DOI · Paper page
- 10.1016/j.surfcoat.2011.05.005 · DOI · Paper page
- 10.1016/j.corsci.2008.08.018 · DOI
- 10.1016/0040-6090(79)90521-2 · DOI
- 10.1080/10426914.2014.901530 · DOI
- 10.1080/10426919508935088 · DOI
- 10.1016/j.corsci.2010.07.011 · DOI
- 10.1016/j.corsci.2010.09.045 · DOI · Paper page
- 10.1016/S1003-6326(08)60052-7 · DOI
- 10.1016/j.corsci.2008.10.023 · DOI
- 10.1016/S0921-5093(03)00229-6 · DOI
- 10.2355/tetsutohagane.93.498 · DOI
- 10.1016/S1006-1266(08)60092-9 · DOI
- 10.1016/S1875-5372(10)60060-4 · DOI
- 10.1016/j.apsusc.2012.01.069 · DOI
- 10.1016/j.corsci.2006.03.008 · DOI
- 10.1016/j.jallcom.2007.05.092 · DOI
- 10.1016/j.scriptamat.2007.01.035 · DOI
- 10.1016/j.electacta.2006.03.032 · DOI
- Zeng K.J., 1989, Zeitschrift fur Metallkunde, 80, 129
- 10.1016/S0257-8972(97)00616-6 · DOI
- 10.1016/j.matchemphys.2006.06.006 · DOI
- 10.1080/10426910903365778 · DOI
- 10.1016/0921-5093(89)90730-2 · DOI
- 10.1016/S1359-6454(00)00131-2 · DOI
- 10.1016/0010-938X(93)90302-W · DOI
- 10.1016/j.corsci.2013.10.021 · DOI
- 10.1016/0956-7151(95)00093-B · DOI
- 10.1007/BF00614617 · DOI
- 10.1007/BF00612170 · DOI
- 10.1016/j.jnucmat.2010.01.022 · DOI
- 10.1016/S1003-6326(11)61100-X · DOI
- 10.1016/j.scriptamat.2005.11.011 · DOI
- 10.1007/BF00656727 · DOI
- 10.1016/j.corsci.2010.05.009 · DOI
- 10.1179/136404609X367344 · DOI
- 10.1016/j.msea.2006.12.085 · DOI
- 10.1016/S0921-5093(00)00754-1 · DOI
Cited by
Sorted by citations
A review on molten sulfate salts induced hot corrosion
Hu, S., Finklea, H., & Liu, X. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2021.03.013 · Cited by 183
Metadata
- Authors
- Weng, F., Yu, H., Chen, C., & Wan, K.
- Affiliations
- Shandong University (CN)
- Corresponding author
- Yu, Huijun
- Chen, Chuanzhong
- Venue
- Materials and Manufacturing Processes
- Publisher
- Informa UK Limited
- Published
- 2014-12-16
- Volume
- 30
- Issue
- 5
- Pages
- 677-684
- ISSN
- 1042-6914 (ISSN-L)
- 1532-2475
- OpenAlex
- W2012971961
- Cited by
- 19
- References
- 2
- Citations by year
- 2026: 1 · 2025: 1 · 2024: 2 · 2023: 1 · 2022: 1 · 2021: 2 · 2020: 3 · 2019: 5 · 2016: 1 · 2015: 2
- FWCI
- 1.17
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Materials and Manufacturing Processes (publishedVersion)
- Funders
- This work was financially supported by the Department of Science and Technology of Shandong Province (Grant No. 2007GG10003002), China.
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
- Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
- Physical Sciences › Engineering › Mechanical Engineering › Intermetallics and Advanced Alloy Properties
- Keywords
- hot corrosion, niobium, yttrium, corrosion resistance, corrosion kinetics, oxide scale composition, Cr2O3, alumina, titanium dioxide, NiCr2O4, nickel oxide, alloying elements
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Influence of Nb and Y on Hot Corrosion Behavior of Ni–Cr-based Superalloys. https://app.cochat.ai/papers/10.1080/10426914.2014.994770
- The paper
- Weng, F., Yu, H., Chen, C., & Wan, K. (2015). Influence of Nb and Y on Hot Corrosion Behavior of Ni–Cr-based Superalloys. Materials and Manufacturing Processes. https://doi.org/10.1080/10426914.2014.994770