The DOI matches its Crossref record.
A Review on Dissimilar Friction Stir Welding of Copper to Aluminum: Process, Properties, and Variants
Abstract
Copper and aluminum materials are extensively used in different industries because of its great conductivities and corrosion resistant nature. It is important to join dissimilar materials such as copper and aluminum to permit maximum use of the special properties of both the materials. The joining of dissimilar materials is one of the most advanced topics, which researchers have found from last few years. Friction stir welding (FSW) technology is feasible to join dissimilar materials because of its solid state nature. Present article provides a comprehensive insight on dissimilar copper to aluminum materials joined by FSW technology. FSW parameters such as tool design, tool pin offset, rotational speed, welding speed, tool tilt angle, and position of workpiece material in fixture for dissimilar Cu–Al system are summarized in the present review article. Additionally, welding defects, microstructure, and intermetallic compound generation for Cu–Al FSW system have been also discussed in this article. Furthermore, the new developments and future scope of dissimilar Cu–Al FSW system have been addressed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A Review on Laser-Assisted Joining of Aluminium Alloys to Other Metals
Bunaziv, I., Akselsen, O. M., Ren, X., Nyhus, B., Eriksson, M., & Gulbrandsen-Dahl, S. (2021) · Metals · doi:10.3390/met11111680 · Cited by 48
Multiphysical characterization of FSW of aluminum electrical busbars with copper ends
Ólafsson, D., Vilaça, P., & Vesanko, J. (2020) · Welding in the World · doi:10.1007/s40194-019-00814-0 · Cited by 29
García-Navarro, D., Ortiz-Cuellar, J. C., Galindo-Valdés, J. S., Gómez-Casas, J., Muñiz-Valdez, C. R., & Rodríguez-Rosales, N. A. (2020) · Crystals · doi:10.3390/cryst11010021 · Cited by 26
Characteristics of Intermetallic Compounds in Dissimilar Friction Stir Welding: A Review
Esmaeili, A., Sbarufatti, C., & Hamouda, A. M. S. (2019) · Metallography, Microstructure, and Analysis · doi:10.1007/s13632-019-00557-w · Cited by 17
A Study on Laser Welding for Dissimilar Metals of Aluminum and Copper Using Pulsed Fiber Laser
Trinh, L., & Lee, D. (2024) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-024-01073-w · Cited by 10
Metadata
- Authors
- Mehta, K. P., & Badheka, V. J.
- Venue
- Materials and Manufacturing Processes
- Publisher
- Informa UK Limited
- Published
- 2015-03-23
- Volume
- 31
- Issue
- 3
- Pages
- 233-254
- ISSN
- 1042-6914 (ISSN-L)
- 1532-2475
- OpenAlex
- W2087233056
- Cited by
- 294
- References
- 0
- FWCI
- 18.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
