Cited by 28Building Energy and Comfort OptimizationBuilding energy efficiency and sustainabilityIndoor Air Quality and Microbial Exposure

The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.

Using EnergyPlus to perform dehumidification analysis on Building America homes

Fang, Xia, Winkler, Jon, Christensen, Dane·2011·HVAC&R Research

Abstract

A parametric study was conducted using EnergyPlus version 6.0 to investigate humidity issues on a typical mid-1990s reference home, a 2006 International Energy Conservation Code home, and a high-performance home in a hot–humid climate. The impacts of various dehumidification equipment and controls are analyzed on the high-performance home. The study used the CitationWalker and Wilson (1998) infiltration model to examine the combined effects of infiltration and mechanical ventilation with balanced and unbalanced mechanical ventilation systems. Indoor relative humidity excursions were examined—specifically, the number of excursions, average excursion length, and maximum excursion length. Space relative humidity, thermal comfort, and whole-house source energy consumption were analyzed for indoor relative humidity set-points of 50%, 55%, and 60%. The study showed and explained why similar trends of high humidity were observed in all three homes, regardless of energy efficiency, and why humidity problems are not necessarily unique in high-performance homes. Thermal comfort analysis indicated that occupants are unlikely to notice indoor humidity problems. The study confirmed that supplemental dehumidification should be provided to maintain space relative humidity below 60% in a hot–humid climate. All modeled supplemental dehumidification options successfully controlled space relative humidity excursions, yet the increase in whole-house energy consumption was much more sensitive to the humidity set-points than the chosen technology option.

Overview

Integrity signals

Registry

Crossref · 10.1080/10789669.2011.564260

Cites

15 of 15 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 15 references

Research works printed but not linked: 11

  1. ASHRAE . 2004a . ANSI/ASHRAE Standard 62.2-2004, Ventilation and acceptable indoor air quality in low-rise residential buildings , Atlanta, GA : American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc .
  2. ASHRAE . 2009a . 2009 ASHRAE Handbook—Fundamentals , Atlanta, GA : American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc .
  3. ASHRAE . 2009b . ANSI/ASHRAE Standard 160-2009, Criteria for moisture-control design analysis in buildings , Atlanta, GA : American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc .
  4. Henderson , H. , Rengarajan , K. and Shirey , D. III . 1992 . The impact of comfort control on air conditioner energy use in humid climates . ASHRAE Transactions , 98 ( 2 ) : 104 – 13 .
  5. Hendron , R. and Engebrecht , C. 2010 . Building America research definition: Updated December 2009 , Golden, CO : National Renewable Energy Laboratory . Report NREL/TP-550–47246
  6. Lstiburek , J. W. 1993 . Humidity control in the humid south . Building Enclosure Technology and Environmental Council Workshop Proceedings, Washington, DC ,
  7. Occupational and Environmental Epidemiology . 2005 . Mold and human health. Occupational and Environmental Epidemiology , NC : North Carolina Department of Health and Human Services, Division of Public Health .
  8. Rudd , A. and Henderson , H. I. 2007 . Monitored indoor moisture and temperature conditions in humid-climate US residences . ASHRAE Transactions , 113 ( 1 ) : 435 – 49 .
  9. U.S. Department of Energy (DOE) . 2010 . EnergyPlus version 6.0 , Washington, DC : U.S. Department of Energy .
  10. U.S. Environmental Protection Agency (EPA) . 2001 . Indoor Humidity Assessment Tool (IHAT) Reference Manual , Washington, DC : Author .
  11. Walker , I. and Sherman , M. 2007 . Humidity implications for meeting residential ventilation requirements , Berkeley, CA, USA : Earnest Orlando Lawrence Berkeley National Laboratory . Report LBNL-62182

Cited by

Sorted by citations

See all 28

Metadata

Authors
Fang, X., Winkler, J., & Christensen, D.
Affiliations
National Laboratory of the Rockies (US)
Venue
HVAC&R Research
Published
2011-06
Volume
17
Issue
3
Pages
268-283
ISSN
  • 1078-9669 (ISSN-L)
  • 1938-5587
OpenAlex
W2089331435
Cited by
28
References
15
Citations by year
2026: 3 · 2024: 1 · 2023: 2 · 2022: 5 · 2021: 2 · 2020: 3 · 2019: 1 · 2018: 4 · 2016: 1 · 2014: 2 · 2013: 4
FWCI
4.17
Type
journal article
Language
en
Open access
closed
Locations
Science and Technology for the Built Environment (publishedVersion)
Topics
  • Physical Sciences › Engineering › Building and Construction › Building Energy and Comfort Optimization
  • Physical Sciences › Engineering › Building and Construction › Building energy efficiency and sustainability
  • Physical Sciences › Environmental Science › Health, Toxicology and Mutagenesis › Indoor Air Quality and Microbial Exposure
Keywords
dehumidification, indoor relative humidity, high-performance homes, hot and humid climate, mechanical ventilation, infiltration, indoor air quality, thermal comfort, Building America

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review