The DOI matches its Crossref record.
Condition monitoring of low-speed bearings — a review
Abstract
Machines with operating speeds less than 600 rpm are classified as low-speed machinery. These machines are usually the most critical items in the production line, generally large and have high rotating inertias. Until recently, there has not been much interest in condition monitoring of these machines as they do not fail easily. However, if an expected failure does occur, the downtime and replacement costs can be enormous, which can lead to massive production loss. Unlike those medium- to high-speed machines, condition monitoring of low-speed machinery presents a challenge as traditional velocity and acceleration sensors are only sensitive to responses with high impact rates. The moving components of these machines that require condition monitoring are mainly bearings and gears. Due to the lack of interest until recently, there is limited literature on condition monitoring of low-speed machinery. In this review, the authors have attempted to gather together the innovative and advanced approaches on condition monitoring of low-speed machinery, with the main focus on rolling element bearing condition monitoring.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“According to Kim et al. [11], low-speed machines can be very time-consuming and more difficult to monitor compared to high-speed machines as the rotating elements and the fault is typically low unless the fault has reached above the background noise level.”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [11]
In the citing paper
“A combination of time domain signal analysis and FFT is normally associated with diagnosing the low-speed machine to produce more accurate results but the major concern is its reliance on the magnitude of the fault having an effect on the carrier frequency [11].”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [11]
In the citing paper
“A combination of time domain signal analysis and FFT is normally associated with diagnosing the low-speed machine to produce more accurate results but the major concern is its reliance on the magnitude of the fault having an effect on the carrier frequency [11].”
From Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review (2021) · cites this paper as [11]
Citations
Cites
Still being checked.
Cited by
Vibration Analysis for Machine Monitoring and Diagnosis: A Systematic Review
Mohd Ghazali, M. H., & Rahiman, W. (2021) · Shock and Vibration · doi:10.1155/2021/9469318 · Cited by 249
“A combination of time domain signal analysis and FFT is normally associated with diagnosing the low-speed machine to produce more accurate results but the major concern is its reliance on the magnitude of the fault having an effect on the carrier frequency [11].”
Background
Metadata
- Authors
- Kim, Y. H., Tan, A. C. C., & Kosse, V
- Affiliations
- Queensland University of Technology (AU)
- Corresponding author
- Kim, Y H
- Venue
- Australian Journal of Mechanical Engineering
- Publisher
- Informa UK Limited
- Published
- 2008-01
- Volume
- 6
- Issue
- 1
- Pages
- 61-68
- ISSN
- 1448-4846 (ISSN-L)
- 2204-2253
- OpenAlex
- W1504335377
- Cited by
- 30
- References
- 0
- Citations by year
- 2026: 1 · 2025: 4 · 2024: 3 · 2023: 4 · 2022: 4 · 2021: 4 · 2019: 2 · 2018: 1 · 2016: 1 · 2015: 2 · 2014: 1 · 2013: 3
- FWCI
- 0.00
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Australian Journal of Mechanical Engineering (publishedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Mechanical Engineering › Gear and Bearing Dynamics Analysis
- Physical Sciences › Engineering › Safety, Risk, Reliability and Quality › Reliability and Maintenance Optimization
- Keywords
- condition monitoring, rolling bearings, bearing fault detection, low-frequency vibration, gear condition monitoring, rotating machinery, sensor limitations
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Condition monitoring of low-speed bearings — a review. https://app.cochat.ai/papers/10.1080/14484846.2008.11464558
- The paper
- Kim, Y. H., Tan, A. C. C., & Kosse, V. (2008). Condition monitoring of low-speed bearings — a review. Australian Journal of Mechanical Engineering. https://doi.org/10.1080/14484846.2008.11464558
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.