The DOI matches its Crossref record.
Estimating the strength of single-ended dislocation sources in micron-sized single crystals
Abstract
Three-dimensional (3D) discrete dislocation dynamics simulations were used to calculate the effects of anisotropy of dislocation line tension (increasing Poisson's ratio, ν) on the strength of single-ended dislocation sources in micron-sized volumes with free surfaces and to compare them with the strength of double-ended sources of equal length. Their plastic response was directly modelled within a 1 µm3 volume composed of a single crystal fcc metal. In general, double-ended sources are stronger than single-ended sources of an equal length and exhibit no significant effects from truncating the long-range elastic fields at this scale. The double-ended source strength increases with ν, exhibiting an increase of about 50% at ν = 0.38 (value for Ni) as compared to the value at ν = 0. Independent of dislocation line direction, for ν greater than 0.20, the strengths of single-ended sources depend upon the sense of the stress applied. The value for α in the expression for strength, τ = α(L)µb/L is shown to vary from 0.4 to 0.84 depending on the character of the dislocation and the direction of operation of the source at ν = 0.38 and L = 933b. By varying the lengths of the sources from 933 to 233b, it was shown that the scaling of the strength of single-ended and double-ended sources with their length both follow a ln(L/b)/(L/b) dependence. Surface image stresses are shown to have little effect on the critical stress of single-ended sources at a length of ∼250b or greater. This suggests that for 3D discrete dislocation dynamics simulations of the plastic deformation of micron-sized crystals in the size range 0.5–20 µm, image stresses making the surface traction-free can be neglected. The relationship between these findings and a recent statistical model for the hardening of small volumes is discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect
Greer, J. R., & De Hosson, J. T. M. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.01.005 · Cited by 1,763
Mechanical behavior of high-entropy alloys
Li, W., Xie, D., Li, D., Zhang, Y., Gao, Y., & Liaw, P. K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100777 · Cited by 1,321
Plasticity of Micrometer-Scale Single Crystals in Compression
Uchic, M. D., Shade, P. A., & Dimiduk, D. M. (2009) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082908-145422 · Cited by 770
Self-citationSize-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy
Zou, Y., Maiti, S., Steurer, W., & Spolenak, R. (2014) · Acta Materialia · doi:10.1016/j.actamat.2013.11.049 · Cited by 541
Plasticity in Confined Dimensions
Kraft, O., Gruber, P. A., Mönig, R., & Weygand, D. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082908-145409 · Cited by 429
Metadata
- Authors
- Rao, S. I., Dimiduk, D. M., Tang, M., Uchic, M. D., Parthasarathy, T. A., & Woodward, C.
- Venue
- Philosophical Magazine
- Publisher
- Informa UK Limited
- Published
- 2007-10-21
- Volume
- 87
- Issue
- 30
- Pages
- 4777-4794
- ISSN
- 1478-6433 (ISSN-L)
- 1478-6435
- 1478-6443
- OpenAlex
- W2121756720
- Cited by
- 188
- References
- 0
- FWCI
- 4.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Estimating the strength of single-ended dislocation sources in micron-sized single crystals. https://app.cochat.ai/papers/10.1080/14786430701591513
- The paper
- Rao, S. I., Dimiduk, D. M., Tang, M., Uchic, M. D., Parthasarathy, T. A., & Woodward, C. (2007). Estimating the strength of single-ended dislocation sources in micron-sized single crystals. Philosophical Magazine. https://doi.org/10.1080/14786430701591513
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.