The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A molecular model for yield and flow in amorphous glassy polymers making use of a dislocation analogue
Abstract
A model has been proposed to account for the yield behaviour of amorphous glassy polymers. The critical step in the yield process is envisaged as being the nucleation under stress of small disc-shaped sheared regions (the strain fields of which are analogous to those of dislocation loops) that form with the aid of thermal fluctuations. The model explains quantitatively the variation of the yield stress with temperature, strain rate and hydrostatic pressure using only two parameters, the shear modulus of the material which must be determined experimentally and the Burgers vector of the sheared region which is a constant related to the dimensions of the molecular chains making up the polymer. The model is also capable of accounting qualitatively for the marked strain softening that occurs in many glassy polymers after the yield point and for the observed variation of the degree of softening with temperature, strain rate and thermal treatment. Finally it is shown that the visco-elastic deformation associated with yield and the observed value of the strain at yield are consistent with a model of this type.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bauwens, J. C., Bauwens‐Crowet, C., & Homès, G. (1969) · Journal of Polymer Science Part A-2: Polymer Physics · doi:10.1002/pol.1969.160071010 · Cited by 105
Cited by
Richeton, J., Ahzi, S., Vecchio, K. S., Jiang, F. C., & Adharapurapu, R. R. (2006) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2005.06.040 · Cited by 570
G'Sell, C., Hiver, J. M., & Dahoun, A. (2002) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(02)00184-1 · Cited by 300
Richeton, J., Ahzi, S., Daridon, L., & Rémond, Y. (2005) · Polymer · doi:10.1016/j.polymer.2005.05.079 · Cited by 272
Richeton, J., Schlatter, G., Vecchio, K. S., Rémond, Y., & Ahzi, S. (2005) · Polymer · doi:10.1016/j.polymer.2005.06.103 · Cited by 189
Metadata
- Authors
- Bowden, P. B., & Raha, S.
- Venue
- The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics
- Publisher
- Informa UK Limited
- Published
- 1974-01
- Volume
- 29
- Issue
- 1
- Pages
- 149-166
- ISSN
- 0031-8086 (ISSN-L)
- OpenAlex
- W2087288995
- Cited by
- 173
- References
- 1
- FWCI
- 9.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A molecular model for yield and flow in amorphous glassy polymers making use of a dislocation analogue. https://app.cochat.ai/papers/10.1080/14786437408213560
- The paper
- Bowden, P. B., & Raha, S. (1974). A molecular model for yield and flow in amorphous glassy polymers making use of a dislocation analogue. The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics. https://doi.org/10.1080/14786437408213560
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.