The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Pyrolysis Study of Polypropylene and Polyethylene Into Premium Oil Products
Abstract
Pyrolysis of polypropylene (PP) and high density polyethylene (HDPE) into fuel like products was investigated over temperature range of 250– 400°C. The product yields as a function of temperature were studied. Total conversion as high as 98.66% (liquid; 69.82%, gas; 28.84%, and residue; 1.34%) was achieved at 300°C in case of PP and 98.12% (liquid; 80.88%, gas; 17.24%, and residue; 1.88%) in case of HDPE at 350°C. The liquid fractions were analyzed by FTIR and GC-MS. The results showed that the liquid fractions consisted of a wide range of hydrocarbons mainly distributed within the C6–C16. The liquid product obtained in case of PP is enriched in the naphtha range hydrocarbons. Similarly, the liquid product obtained in case of HDPE is also enriched in naphtha range hydrocarbons with preponderance in gasoline and diesel range hydrocarbons. The% distribution of paraffinic, olefinic, and naphthenic hydrocarbons in liquid product derived from PP is 66.55, 25.7, and 7.58%, respectively, whereas in case HDPE, the% distribution is 59.70, 31.90, and 8.40%, respectively. Upon comparing the hydrocarbon group type yields, PP gave high yield of paraffinic hydrocarbons while HDPE gave high yields of olefins and naphthenes. The whole liquid fractions and their corresponding distillates fractions were also analyzed for fuel properties. The results indicated that the derived liquid fractions were fuel-like meeting the fuel grade criteria.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recovery of value-added products from the catalytic pyrolysis of waste tyre
Shah, J., Jan, M. R., & Mabood, F. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2008.12.017 · Cited by 71
Cited by
Degradation rates of plastics in the environment
Chamas, A., Moon, H., Zheng, J., Qiu, Y., Tabassum, T., Jang, J. H., Abu-Omar, M., Scott, S. L., & Suh, S. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06635 · Cited by 3,463
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Catalytic pyrolysis of plastic waste: A review
Miandad, R., Barakat, M. A., Aburiazaiza, A. S., Rehan, M., & Nizami, A. S. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.06.022 · Cited by 964
Al-Rumaihi, A., Shahbaz, M., Mckay, G., Mackey, H., & Al-Ansari, T. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2022.112715 · Cited by 650
Artificial intelligence for waste management in smart cities: a review
Fang, B., Yu, J., Chen, Z., Osman, A. I., Farghali, M., Ihara, I., Hamza, E. H., Rooney, D. W., & Yap, P.-S. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01604-3 · Cited by 629
Metadata
- Authors
- Ahmad, I., Khan, M. I., Khan, H., Ishaq, M., Tariq, R., Gul, K., & Ahmad, W.
- Venue
- International Journal of Green Energy
- Publisher
- Informa UK Limited
- Published
- 2014-03-03
- Volume
- 12
- Issue
- 7
- Pages
- 663-671
- ISSN
- 1543-5075 (ISSN-L)
- 1543-5083
- OpenAlex
- W2051570116
- Cited by
- 463
- References
- 1
- FWCI
- 1.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Pyrolysis Study of Polypropylene and Polyethylene Into Premium Oil Products. https://app.cochat.ai/papers/10.1080/15435075.2014.880146
- The paper
- Ahmad, I., Khan, M. I., Khan, H., Ishaq, M., Tariq, R., Gul, K., & Ahmad, W. (2015). Pyrolysis Study of Polypropylene and Polyethylene Into Premium Oil Products. International Journal of Green Energy. https://doi.org/10.1080/15435075.2014.880146
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.