CoChat

Evaluation of masks and mask material suitability for bioaerosol capture

Peyravi, Arman, Quecke, Emily, Kosareva, Elena, Dolez, Patricia, Doroshenko, Alexander, Smith, Stephanie, Quemerais, Bernadette, Hashisho, Zaher · 2024 · Journal of Occupational and Environmental Hygiene

The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.

Abstract

Non-medical masks such as disposable non-medical, commercially produced cloth, and homemade masks are not regulated like surgical masks. Their performance, in terms of filtration efficiency and breathability, is variable and unreliable. This research provides a quantitative evaluation of various non-medical masks, assesses their fabrics’ potential for the reduction of transmission of bioaerosols such as the SARS-CoV-2 virus, and compares them to surgical masks and N95 filtering facepiece respirators. Using a testing line with a NaCl challenge aerosol, four types of commercial reusable cloth masks, two types of disposable non-medical masks, three types of surgical or N95 masks, and seven types of commonly available materials were tested individually and in combinations. The testing line and procedure were adapted from the ASTM F2299-03: Standard Test Method for Determining the Initial Efficiency of Materials Used in Medical Face Masks to Penetration by Particulates Using Latex Spheres testing method used for testing surgical masks. Filtration efficiencies at 0.15 µm particle diameter at a face velocity of 25 cm/sec for commercial cloth masks, disposable non-medical masks, surgical masks, commercial mask combinations, and homemade combinations ranged from 16–29%, 39–76%, 91–97%, 51–95%, and 45–94%, respectively. The pressure drop results for the different masks and material combinations were all under 3 mm H2O/cm2 except for one material configuration. This study builds on other research that looks at individual materials and masks by testing combinations alongside the individual masks and materials. With proper layering, household materials can achieve the filtration efficiency and low pressure drop requirements of surgical masks. The filtration capabilities of disposable and cloth mask fabrics vary considerably meaning that they are not a reliable or consistent facemask option, regardless of fit.

Overview

Integrity signals

Registry

Crossref · 10.1080/15459624.2024.2394613

Cites

21 of 21 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Citations

Cites

Show all 21 references

Research works printed but not linked: 4

  1. ASTM International. 2010. ASTM F2299-03: standard test method for determining the initial efficiency of materials used in medical face masks to penetration by particulates using latex spheres. West Conshohocken (PA): ASTM. p. 8.
  2. ASTM International. 2022. ASTM F2101-22: standard test method for evaluating the bacterial filtration efficiency (BFE) of medical face mask materials, using a biological aerosol of Staphylococcus aureus. West Conshohocken (PA): ASTM International.
  3. ASTM International. 2023. ASTM F2100-23: standard specification for performance of materials used in medical face masks. West Conshohocken (PA): ASTM International. p. 5.
  4. [CEN] European Committee for Standardization. 2019. CEN – EN 14683: medical face masks – requirements and test methods. Brussels (Belgium): European Committee for Standardization (CEN). p. 26.

Cited by

See all 1

Metadata

Authors
Peyravi, A., Quecke, E., Kosareva, E., Dolez, P., Doroshenko, A., Smith, S., Quemerais, B., & Hashisho, Z.
Affiliations
  • University of Alberta (CA)
  • Alberta Health Services (CA)
  • Division of Preventive Medicine, Department of Medicine, University of Alberta, Edmonton, Alberta, Canada
Venue
Journal of Occupational and Environmental Hygiene
Published
2024-10-02
Volume
21
Issue
10
Pages
709-720
ISSN
  • 1545-9624 (ISSN-L)
  • 1545-9632
OpenAlex
W4403129289
Cited by
1
References
21
Citations by year
2026: 1
FWCI
0.29
Type
journal article
Language
en
Open access
closed
Locations
  • Journal of Occupational and Environmental Hygiene (publishedVersion)
  • PubMed (publishedVersion)
Funders
Natural Sciences and Engineering Research Council (NSERC) of Canada
Topics
  • Health Sciences › Medicine › Pulmonary and Respiratory Medicine › Infection Control and Ventilation
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Aerosol Filtration and Electrostatic Precipitation
  • Social Sciences › Sociology and Political Science › COVID-19 Prevention and Impact
Keywords
face masks, cloth masks, surgical masks, N95 respirators, SARS-CoV-2 transmission, filtration efficiency, pressure drop, homemade masks
MeSH terms
COVID-19, SARS-CoV-2, N95 Respirators, Respiratory Aerosols and Droplets, Aerosols, Filtration, Humans, Masks, Materials Testing, Respiratory Protective Devices, Textiles, Occupational Exposure

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Evaluation of masks and mask material suitability for bioaerosol capture. https://app.cochat.ai/papers/10.1080/15459624.2024.2394613
The paper
Peyravi, A., Quecke, E., Kosareva, E., Dolez, P., Doroshenko, A., Smith, S., Quemerais, B., & Hashisho, Z. (2024). Evaluation of masks and mask material suitability for bioaerosol capture. Journal of Occupational and Environmental Hygiene. https://doi.org/10.1080/15459624.2024.2394613

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.