Fatty Acid/Expanded Graphite Composites as Phase Change Material for Latent Heat Thermal Energy Storage
The DOI matches its Crossref record.
Abstract
The fatty acid/expanded graphite (EG) composites as phase change material (PCM) for latent heat thermal energy storage were prepared by means of vacuum impregnation method and their thermal properties and heat charging/discharging characteristics were determined. In the composites, the fatty acids (capric, lauric, and myristic acids) act as a phase change latent heat storage material, and the EG serves like an absorptive material that penetrates melted fatty acid into its porous structure. The maximum fatty acids absorption of EG was found as 80 wt% without melted fatty acid oozing from the composites. Thermal properties of fatty acid/EG composites were measured by differential scanning calorimetry (DSC) method. DCS results indicated that the melting and solidification temperatures of the composite PCMs were almost the same as those of fatty acids, and the latent heats of composites were little less than those of the pure fatty acids. The heat charging and discharging rate of the composites were obviously increased due to expanded graphite that had a high thermal conductivity. The prepared fatty acid/EG composites as PCM have great potential for thermal energy storage applications in terms of their satisfactory thermal properties, improved thermal conductivity, and good heat charging and discharging characteristics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Phase change materials for thermal energy storage
Pielichowska, K., & Pielichowski, K. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.03.005 · Cited by 2,106
Tauseef-ur-Rehman, Ali, H. M., Janjua, M. M., Sajjad, U., & Yan, W.-M. (2019) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2019.02.001 · Cited by 507
Eanest Jebasingh, B., & Valan Arasu, A. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.07.031 · Cited by 477
Zhang, Z., Zhang, N., Peng, J., Fang, X., Gao, X., & Fang, Y. (2012) · Applied Energy · doi:10.1016/j.apenergy.2011.10.014 · Cited by 454
Impregnation of porous material with phase change material for thermal energy storage
Nomura, T., Okinaka, N., & Akiyama, T. (2009) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2009.02.045 · Cited by 300
Metadata
- Authors
- Sari, A., Karaipekli, A., & Kaygusuz, K.
- Venue
- Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Publisher
- Informa UK Limited
- Published
- 2008-01-24
- Volume
- 30
- Issue
- 5
- Pages
- 464-474
- ISSN
- 1556-7036 (ISSN-L)
- 1556-7230
- OpenAlex
- W2094745078
- Cited by
- 49
- References
- 0
- FWCI
- 1.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fatty Acid/Expanded Graphite Composites as Phase Change Material for Latent Heat Thermal Energy Storage. https://app.cochat.ai/papers/10.1080/15567030601003700
- The paper
- Sari, A., Karaipekli, A., & Kaygusuz, K. (2008). Fatty Acid/Expanded Graphite Composites as Phase Change Material for Latent Heat Thermal Energy Storage. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. https://doi.org/10.1080/15567030601003700
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.